DeFelsko PosiTector 6000 Probe Details
Select from a variety of measurement ranges and probe styles
The PosiTector 6000 consists of a body and a probe. A wide selection of interchangeable probes are available. All bodies accept all probes. |
![]() |
![]() |
- Two (2) year probe warranty
- Heavy-duty, gold-plated locking connector for industrial environments
- Certificate of Calibration (Long Form) traceable to NIST or PTB included with every probe
- Each probe retains its own unique calibration information (allowing full probe interchangeability)
- Extended cables available for underwater or remote measuring. Specify length when ordering
- Probes are PosiTector SmartLink compatible - wirelessly connect PosiTector 6000 probes to your smart device
Probe Ordering Guide:
F - for ferrous metals (steel and cast iron)
N - for non-ferrous metals (aluminum, copper, titanium, etc.)
FN - for all metal substrates - Automatically recognizes the substrate and takes a measurement
Probe Model | Substrates | Probe Style | Measuring Range |
F | Ferrous | integral | 0 - 60 mils (0 - 1500 μ) |
FS | Ferrous | regular cabled | 0 - 60 mils (0 - 1500 μ) |
FXS Xtreme™ | Ferrous | regular cabled | 0 - 80 mils (0 - 2000 μ) |
FRS | Ferrous | 90° regular cabled | 0 - 60 mils (0 - 1500 μ) |
F0S | Ferrous | 0° microprobe | 0 - 45 mils (0 - 1150 μ) |
F45S | Ferrous | 45° microprobe | 0 - 45 mils (0 - 1150 μ) |
F90S | Ferrous | 90° microprobe | 0 - 45 mils (0 - 1150 μ) |
F90ES | Ferrous | 90° extended microprobe | 0 - 45 mils (0 - 1150 μ) |
FT | Ferrous | integral | 0 - 250 mils (0 - 6 mm) |
FTS | Ferrous | high-range cabled | 0 - 250 mils (0 - 6 mm) |
FTRS | Ferrous | 90° high-range cabled | 0 - 250 mils (0 - 6 mm) |
FHXS Xtreme™ | Ferrous | high-range cabled | 0 - 400 mils (0 - 10000 μ) |
FKS | Ferrous | high-range cabled | 0 - 500 mils (0 - 13 mm) |
FJS | Ferrous | high-range cabled | 0 - 1.0 inch (0 - 24 mm) |
FLS | Ferrous | high-range cabled | 0 - 1.5 inches (0 - 38 mm) |
N | Non-Ferrous | integral | 0 - 60 mils (0 - 1500 μ) |
NS | Non-Ferrous | regular cabled | 0 - 60 mils (0 - 1500 μ) |
NRS | Non-Ferrous | 90° regular cabled | 0 - 60 mils (0 - 1500 μ) |
NAS | Non-Ferrous | regular cabled | 0 - 25 mils (0 - 625 μ) |
N0S | Non-Ferrous | 0° microprobe | 0 - 25 mils (0 - 625 μ) |
N45S | Non-Ferrous | 45° microprobe | 0 - 25 mils (0 - 625 μ) |
N90S | Non-Ferrous | 90° microprobe | 0 - 25 mils (0 - 625 μ) |
NKS | Non-Ferrous | high-range cabled | 0 - 500 mils (0 - 13 mm) |
FN | Ferrous / Non-Ferrous | integral | 0 - 60 mils (0 - 1500 μ) |
FNS | Ferrous / Non-Ferrous | regular cabled | 0 - 60 mils (0 - 1500 μ) |
FNRS | Ferrous / Non-Ferrous | 90° regular cabled | 0 - 60 mils (0 - 1500 μ) |
FNDS (Duplex) | Ferrous / Non-Ferrous | regular cabled | 0 - 60 mils (0 - 1500 μ) |
FNTS | Ferrous / Non-Ferrous | high-range cabled | 0 - 250 mils (0 - 6 mm) |
FNGS | Ferrous / Non-Ferrous | high-range cabled | 0 - 2.5 inches (0 - 63.5 mm) |
Ideal for one-handed operation |
![]() |
![]() |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
These constant-pressure, stainless steel probes are hermetically sealed to be totally waterproof - ideal for underwater use. |
![]() |
![]() |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Enhanced measuring speed of 100+ readings per minute makes it ideal for measuring large, rough surfaces quickly. Scan mode increases measurement rate to over 200 readings per minute (PosiTector Advanced only).
Compatible with PosiTector bodies with serial numbers greater than 700,000.
Probe Model | FXS Xtreme™ | |
![]() |
Range: | 0 - 80 mils |
0 - 2000 μ | ||
*Accuracy: | ± (0.05 mils + 1%) 0 - 2 mils | |
± (0.1 mils + 1%) > 2 mils | ||
± (1 μ + 1%) 0 - 50 μ | ||
± (2 μ + 1%) > 50 μ |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Right angle probe for measuring within areas of low headroom. |
![]() |
![]() |
These constant-pressure, stainless steel probes are hermetically sealed to be totally waterproof - ideal for underwater use.
90º Regular | Probe Model | FRS | NRS | FNRS |
![]() |
Range: | 0 - 60 mils | ||
0 - 1500 μ | ||||
*Accuracy: | ± (0.05 mils + 1%) 0 - 2 mils | |||
± (0.1 mils + 1%) > 2 mils | ||||
± (1 μ + 1%) 0 - 50 μ | ||||
± (2 μ + 1%) > 50 μ |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Cabled FNDS Probe for Duplex Coatings
The PosiTector 6000 FNDS probe measures the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading. |
![]() |
![]() |
Duplex coating systems use a combination of two corrosion protection systems – typically paint or powder coating over galvanized steel (hot-dip, electro or zinc spray metallizing). The resultant corrosion protection is superior to either protection system used independently.
When disabled, the gage will operate like a conventional combination ferrous/non-ferrous instrument (similar to PosiTector 6000 FNS probe). Ideal for measuring non-magnetic coatings over steel and non-conductive coatings over non-ferrous metal substrates. Compatible with PosiTector Advanced (serial numbers 730,000+) and PosiTector Standard gage bodies with a color display. A Simple gage update may be required. |
![]() |
Probe Model FNDS (Duplex) | |||
Range: | 0 - 60 mils | ||
0 - 1500 μ | |||
Minimum Zinc Thickness: | 0.5 mil (13 μ) | ||
*Paint Layer Accuracy: | Mils | ± (0.05 mils + 1%) 0 - 2 mils | |
± (0.1 mils + 1%) > 2 mils | |||
Microns | ± (1 μ + 1%) 0 - 50 μ | ||
± (2 μ + 1%) > 50 μ | |||
*Zinc Layer Accuracy: | Mils | ± (0.1 mils + 1%) 0.5 - 2 mils | |
± (0.2 mils + 1%) > 2 mils | |||
Microns | ± (2 um + 1%) 13 - 50 um | ||
± (4 um + 1%) > 50 um |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
F0S, N0S With our smallest measuring tip and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. |
![]() |
![]() |
The straight F0S and N0S Microprobes have a quick release adapter that makes them constant pressure probes for alignment on small, flat or curved parts. This adapter is held in place by a spring. If the sleeve is not required, simply pull it off the probe.
0º Micro Probe | Probe Model | F0S | N0S |
![]() |
Range: | 0 - 45 mils | |
0 - 1150 μ | |||
*Accuracy: | ± (0.02 mils + 1%) 0 - 4 mils | ||
± (0.1 mils + 3%) > 4 mils | |||
± (.5 μ + 1%) 0 - 100 μ | |||
± (2 μ + 3%) > 100 μ |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
With our smallest measuring tip and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. |
![]() |
![]() |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Right angle probe for measuring within areas of low headroom. |
![]() |
![]() |
With our smallest measuring tip and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges.
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Cabled 90° Extended Length Microprobe
Right angle extended length (350 mm / 13.75") probe for measuring within areas of low headroom. |
![]() |
![]() |
With our smallest measuring tip, longest probe length and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges.
90º Extended Length Micro Probes | Probe Model | F90ES |
![]() |
Range: | 0 - 45 mils |
0 - 1150 μ | ||
*Accuracy: | ± (0.02 mils + 1%) 0 - 4 mils | |
± (0.1 mils + 3%) > 4 mils | ||
± (.5 μ + 1%) 0 - 100 μ | ||
± (2 μ + 3%) > 100 μ |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
High-Range Probes
Ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. |
![]() |
![]() |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. |
![]() |
![]() |
High Range | Probe Model | FKS | NKS |
![]() |
|||
Range: | 0 - 500 mils | ||
0 - 13 mm | |||
*Accuracy: | ± (1 mils + 3%) | ||
± (0.02 mm + 3%) |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Measure non-conductive coatings on steel substrates. FHXS Xtreme™ probe with Alumina wear face and braided cable for hot or rough surfaces. |
![]() |
![]() |
Hot surfaces up to 250° C (500° F).Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.
Probe Model | FHXS Xtreme™ | |
![]() |
Range: | 0 - 400 mils |
0 - 10,000 μ | ||
*Accuracy: | ± (0.1 mils + 3%) | |
± (2 μ + 3%) |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Ideal for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. |
![]() |
![]() |
- Lightweight, ergonomic design - 66% smaller than comparable probes
- Electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy
Probe Model | FJS | |
![]() |
Range: | 0 - 1.0 in. |
0 - 25 mm | ||
*Accuracy: | ± (0.01 in. + 3%) | |
± (0.2 mm + 3%) |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Measures intumescent paint and other thick protective coatings on steel. |
![]() |
![]() |
- Measures up to 38 mm (1.5 inches)
- Braided stainless steel cable - kink-proof, wear and cut resistant
- Includes hard shell case and 19 mm (750 mil) shim
Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.
Probe Model | FLS | |
![]() |
Range: | 0 - 1.5 inches |
0 - 38 mm | ||
*Accuracy: | ± (0.01 in. + 3%) | |
± (0.2 mm + 3%) | ||
Minimum Surface Area: | 3.25 x 3.25 in. (83 x 83 mm) | |
Minimum Substrate Thickness: | 0.1 in. (2.5 mm) |
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.
Measures very thick coatings on ALL metals. Ideal for measuring ship hull coatings and thick intumescent paints. |
![]() |
![]() |
- Measures up to 63.5 mm (2.5 inches)
- Measures non-conductive coatings on both ferrous and non-ferrous metal substrates
- Braided stainless steel cable - kink-proof, wear and cut resistant
- Long-lasting, low wear probe face to facilitate scanning of large surfaces
- Includes a handle for easy one-handed operation
- Includes a set of traceable coating thickness standards
- Includes instruction card
Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.
*Accuracies are stated as a fixed value plus a percentage of the gage's actual reading.