Checkline DCF-900 Series Coating Thickness Gauge

Checkline DCF-900 Coating Thickness Gauge Ferrous, 0-40.0 mils

See More Coating Thickness Gauges

This product has been replaced by the MiniTest 650F

Measuring Range: 0-40.0 mils (0-999 µm)

Separate Probe

Keypad-selectable units: Mils or Microns

No Statistics Displayed or Memory

Measuring Range 0-40.0 mils (0-999 µm)

DCF-900 Coating Thickness Gauges measures the thickness of paint, plating, coatings and galvanizing on iron or steel...more accurately, dependably and economically!

DCN-900 Coating Thickness Gauges measures the thickness of paint coatings, anodize on aluminum, brass, zinc, stainless steel and other non-ferrous metals.

line
Features
line

Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.
Keypad-selectable English or metric units
Continuous reading update detects soft coatings as probe tip "sinks" into them
The DCF-900 and DCN-900 Coating Thickness Gauges include the gauge and probe, a bare test plate, two precision calibration shims & instructions, all in a foam-fitted carrying case
Calibration to NIST standards is available upon request
Remote probe permits easy access for difficult, hard-to-reach places
Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job
Very reliable operation... Consistent, repeatable measurements
Excellent results with thin substrates... As thin as 0.005" (10 µm)

line
Photo Gallery
line

line
Complete Kit
line

The 900 Series Gauges are supplied as a complete kit including gauge, ferrous or non-ferrous zero plate, 2 plastic test shims and instruction manual in a foam fitted, hard plastic carrying case.

complete kit

line
Specifications
line

Range	0.1-40.0 mils (0-999 µm)
Resolution	0.1 mil (1 µm)
Accuracy	0-10 mils: ±0.1 mil 10-40 mils: ±1% of reading
Probe	DCF-900: Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable DCN-900: Eddy current, 0.4" (10mm) dia., spring-loaded, with v-notched shell and 28" (70cm) cable
Battery/Life	9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use.
Dimension	5.7" x 3.1" x 1.5" (145 x 79 x 38 mm)
Weight	9 oz. (250 g)
Temperature Limits	Material: 15 to 140° F (-10 to 60° C) Ambient: 32 to 125° F (0 to 50° C)
Warranty	One (1) year

line
Related Products
line

NTS
NIST Certified Plastic Shims

line

TS-5CG
Commercial Grade Shim Set

line
Measuring Limits
line

	Minimum Radius for Convex Surfaces	0.375" (9.5 mm)
	Minimum Radius for Concave Surfaces	2.5" (63.5 mm)
	Minimum Headroom	2.5" (63.5mm)
	Minimum Sample Diameter	0.5" (13 mm)
	Minimum Substrate Thickness - F	0.020"
	Minimum Substrate Thickness - NFe	NA