Analog Dial Thickness Gauge

---

Measuring Range: 0 - 30 mm / 0 - 1.00 inch

---

Resolution: 0.1 mm / 0.001 inch

---

Jaw Depth: 200 mm / 7.87 inch

---

The Checkline K-200 thickness gauge features an easy to read analog display along with the high accuracy.

The K-200 model is available with 5 different feelers, which can be found below. Measurement is done by a spring force. Opening by lifting device (lever) - self closing.

The K-200 is ideal for determining the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, etc.

Standard spring Force is 1.8N, however a Reduced Force Version offering 0.9N as well as a Increased Force Version offering 2.5N is available.

Kit Contents

---

Features

---

• Thickness gauge K-200 features an easy to read analog display along with the high accuracy
• The thickness gauge is available with 5 different feelers, which can be found below
• Measuring by spring force
• Opening by lifting device – self closing thickness gauge K-200 Thickness gauge with lifting device
• Swing out foot for on-table operation

Specifications

---

Resolution	1.00" (KZ models) 30 mm (K models)
Measuring Range	0.001" (KZ models) 0.1 mm (K models)
Depth Of Jaw	7.87 in (200 mm)
Scale Diameter	2.3 in (58 mm)
Measuring Pressure	2 N (Optional: 1 N or 4 N)
Feeler Shape	Select Feeler "A", "B", "C", "D" or "E"
Measuring Principle	Self closing
Weight, net (gross)	1.5 Lbs (700 g)

Feeler Shape

---

	Feeler: A For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Customized feeler type > a with diameter 30 to 56 mm are available on request at extra charge
	Feeler: B For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard
	Feeler: C For soft leather, cardboard, paper, foils, etc.
	Feeler: D For hard leather, plywood, fiberboard, etc.
	Feeler: E For sheet metal, etc.