Checkline MTT-25-300-G - Digital Thickness Gauge, 0-25mm for GEO-TEXTILE with 300 mm Jaw Depth - 25mm Measuring Range, 300mm Jaw Depth, Test Pressure (refer to table above)

See More Dial Thickness Gauges

Checkline MTT-25-300-G - Digital Thickness Gauge, 0-25mm for GEO-TEXTILE with 300 mm Jaw Depth - 25mm Measuring Range, 300mm Jaw Depth, Test Pressure (refer to table above)

See More Dial Thickness Gauges
Price:
$798.00
    warrenty

    Product Description
    Measuring Range: 0 - 10 mm (0 - 0.400") option 25MM: 0 - 25 mm (0 - 1.000")
    Resolution: 0.01 mm (0.001")
    Offered in either 300 mm (12") or 500 mm (20") Jaw Depth for measurement of wide samples
    Measures material thickness of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc.


    300 Series for 300mm Jaw Depth (12")
    500 Series for 500mm Jaw Depth (20")

    Measuring Range: 0 - 10 mm (0 - 0.400") or 0 - 25 mm (0 - 1.000")

    Resolution: 0.01 mm (0.001")

    The MTT-10 Digital Textile / Leather Thickness Gauge is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generates a specific pressure as required by many standardized test standards necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles, and similar compressible materials.

    The feeler shape and the pressure are corresponding to DIN EN ISO standards, however, this low-cost thickness gauge is suitable for quick comparison measurements and does not strictly conform to the standard.


    line
    Features
    line

    • Swing-out foot for on-table operation
    • Digital display with selectable units inch or mm
    • Measuring feeler 20 cm²
    • Zero setting by pushing a button


    line
    Specifications
    line

    Measuring Range0 - 10 mm (standard) or 0 - 25 mm (optional)
    Resolution0.01 mm
    Accuracy± 0.02 mm
    Depth of Jaws300 mm (300 Series)
    500 mm (500 Series)
    DisplayLCD 4 Digit, 8 mm tall
    PressureRefer to table below (gauge, feeler, weight)
    Feeler shape50.5 mm Ø = 20 cm²
    56.42 mm Ø = 25 cm²


    line
    Available Models
    line

    TypeStandardApplicationFeeler ØFeeler shape cm²Pressure
    Tsimilar to DIN EN ISO 5084Textiles and Non-woven textiles50.42201 kPA
    Vsimilar to DIN EN ISO 9073-2Standard fleece56.42250.5 kPA
    Lsimilar to DIN EN ISO 2589 / 53326Leather100.78550 kPA
    Gsimilar to DIN EN ISO 964-GeoMaterials56.42252 kPA


    line
    Downloads
    line

    Checkline MTT-10 Digital Textile / Leather Thickness Gauge - Instruction Manual