Name: Checkline PD765-7X5-00 - Trident Process & Temperature Digital Panel Meter, 1/8 DIN, CE, UL/C-UL
Brand: Checkline
SKU: 1163
Price: 505.00 USD
Availability: InStock

Checkline PD765-7X5-00 - Trident Process & Temperature Digital Panel Meter, 1/8 DIN, CE, UL/C-UL

See More Tension Indicators & Amplifiers

Checkline PD765-6R3-20 Digital Tension Indicator 4-Digit Display

The Checkline PD765 Digital Indicator is designed to work with Check-Line tension sensors providing a large, bright LED display of real-time tension values. It is easy to set up and permits flush panel mounting in a 1/8 DIN cutout. The PD765-6R3-20 offers 4-20 mA output for external recording and data-logging purposes. Hi/Lo limits and relay contacts can be optionally specified on PD765-6R5-10 supplied instead of the 4-20 mA analog output. The standard model PD765-6R3-20, operates from all worldwide AC-Power (85-265V AC). 0-10V DC output is not available

line
Features
line

Can be scaled to any engineering units desired with user-set decimal point.
4-20 mA analog output for recording and control purpose (No analog output provided on PD765-6R5-10)
Requires 85-265V AC Power, provides regulated power for the tension sensor
Hi/Lo Limits and relay contacts provided on PD765-6R5-10 (supplied instead of 4-20ma output)
User-set filters can be used to adjust signal sensitivity to reduce fluctuations of tension values

line
Specifications
line

Display Range	-1999 to 9999
Display	4-digit Red LED, 14.2 mm high
Display Intensity	Eight user selectable levels
Front Panel	NEMA 4X, IP65; panel gasket provided
Programming Methods	Four front panel buttons, cloning with Copy feature, PC with MeterView or LavVIEW software and Modbus registers. Certified LabVIEW driver available.
Noise Filter	Programmable 2 to 199 (0 will disable filter)
Display Update Rate	Process/RTD: 3.7-5/sec; TC: 1.8-2.5/sec
Overrange	Display flashes 9999
Underrange	Display flashes -1999
Recalibration	All inputs are calibrated at the factory; recalibration is recommended at least every 12 months.
Min/Max Display	Stored until reset by user or meter is turned off
Password	Restricts modification of programmed settings
Non-Volatile Memory	Settings stored for a minimum of 10 years
Power Options	85-265 VAC; 12-36 VDC
Required Fuse	UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse
Normal Mode Rejection	64 dB at 50/60 Hz
Isolation	4 kV input/output-to-power line; 500 V input-to-output or output-to-24 VDC supplies. -6R5 models only: 100 V output-to-24 VDC supply
Operating Temperature	0 to 65°C
Storage Temperature	-40 to 85°C
Relative Humidity	0 to 90% non-condensing
Connections	Power & Signal: removable screw terminal blocks accept 12 to 22 AWG. Serial: RJ11 header, standard on all meters
Enclosure	1/8 DIN, high impact plastic, 94 V-0, color: gray
Weight	9.5 oz (269 g) (including options)
Warranty	3 years
Accuracy	±0.05% FS ±1 count; square root: ±0.1% FS ±2 counts
Function	Linear or square root
Low-Flow Cutoff	0 to 9999 (0 disables cutoff function)
Decimal Point	Up to 3 decimals
Calibration	Scale without signal or calibrate with signal source
Calibration Range	User programmable over entire range of meter
Input Inpedance	Voltage range: greate than 1MΩ, Current range: 50-100 Ω, varies with resettable fuse impedance
Input Overload	Protected by automatically resettable fuse
Temperate Drift	±50 PPM/°C
Transmitter Supply	Isolated, one or two transmitter supplies: P1: 24 VDC ±10% @ 200 mA max (-10 option) P1 & P2: 24 VDC ±10% @ 200 mA & 40 mA max (-20 option)

Realays (Model PD765-6R5-10 ONLY)

Rating	Form C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP (≈50 watts) @ 125/250 VAC for inductive loads such as contactors, solenoids, etc.
Deadband	0 - 100% FS, user selectable
High or Low Alarm	User may program any alarm for high or low
Relay Operation	1. Automatic (non-latching) 2. Latching 3. Pump alternation control
Relay Reset	User selectable via front panel buttons or PC 1, Automatic reset only (non-latching) 2. Automatic plus manual reset at any time (non-latching) 3. Manual reset only, at any time (latching) 4. Manual reset only after alarm condition has cleared (latching)
Automatic Reset	Relays reset when input passes the reset point
Manual Reset	Front panel button, MeterView, Modbus registers
Time Delay	0 to 199 seconds, on and off delays; programmable
Fail-Safe Operation	Programmable, independent for each relay. Relay coils are energized in non-alarm condition. In case of power failure, relays will go to alarm state.
Auto Initialization	When power is applied to the meter, relays will reflect the state of the input to the meter

Isolated 4-20 MA Transmiter Output

Scaling Range	1.00 to 23.00 mA; reverse scaling allowed
Calibration	Factory calibrated 4.00 to 20.00 mA
Accuracy	±0.1% FS ±0.004 mA
Temperature Drift	50 PPM/°C Note: Analog output drift is separate from input drift
Isolation	500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power line
Output Loop Resistance	24 VDC: Minimum - 10Ω Maximum - 700Ω 35 VDC (external): Minimum - 100Ω Maximum - 1200Ω

line
Ordering Guide
line

PD765-6R3-20 - Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 4-20mA Analog output. Requires 85-265V AC-Power

PD765-6R5-10 - Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 2 Alarm Limits & Relays. No analog output provided. Requires 85-265V AC-Power

PD6000-6R3 Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 4-20mA Analog output. Requires 85-265V AC-Power

line
Downloads
line