Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm

Resolution: .001" (0.01 mm)

Datalogging: YES

The Dakota Ultrasonics CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMXDL automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating

Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).

Five user-selected operating modes are included:

• Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
• Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
• Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
• Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
• Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating

Kit Contents

Features

Special

• Built-in memory with RS-232 output for transferring data to a Printer or PC
• Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
• Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column 
• Each "grid type" File can be set for up to 999 rows by 52 columns
• Each "sequential" File can be set for up to 512 rows by 1 column
• Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan

Features

• Auto probe recognition with Auto Zero or Manual Zero.
• Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
• Wide variety of dual-element probes can be used for nearly any application.
• 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
• Bar graph with user-set start end values providing highest resolution around the target thickness value.
• Display Hi/Lo Alarm Limits with audible and visual indicators.
• Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
• 2 Year Warranty & CE-Certified
• Includes NIST-Traceable Calibration.
• Metal housing provides strong protection against harsh environments.
• TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
• Measures Coatings up to 0.100"

Specifications

High Speed Scan Mode & B-Scan Mode

Hi-Speed Scan Mode Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off	B-Scan Mode The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left

Measuring Limits

	Minimum Radius for Convex Surfaces	0.350" (8.89 mm)
	Minimum Radius for Concave Surfaces	3" (76.2 mm)
	Minimum Headroom	1" (25.0 mm)
	Minimum Sample Diameter	0.150" (3.8 mm)
	Minimum Substrate Thickness - F	na
	Minimum Substrate Thickness - NFe	na

Related Products

NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data

DataComm Software for Thickness Gauges

TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop

Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration

TI-CMX-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas