Mark-10 Myometer Kit Series EKM5

---

Includes a Series 5 advanced force gauge, looped strap, hook, tabletop mount, and accessories

---

200 lbF (1,000 N) capacity

---

The Mark-10 EKM5-200 Myometer Kit facilitates a wide range of strength assessments and ergonomics studies. Featuring a Mark-10 Series 5 force gauge with 200 lbF (1,000 N) range, tabletop mount, strap, and accessories, this kit is ideal for ergonomists and other professionals

Kit Contents

---

Features

---

• Measures real time, average, and peak pull and push forces
• 200 lbF (1,000 N) force capacity
• Accuracy of ±0.1% of full scale
• Sampling rate of 7,000 Hz
• USB, RS-232, and analog outputs
• High / low limit indicators, for pass / fail and minimum force testing
• 1,000-point data memory with statistical calculations. Data may be bulk downloaded to included MESUR® Lite data collection software.
• Force gauge is compatible with other Mark-10 grips and attachments

Specifications

---

Accuracy	±0.1% of full scale
Sampling rate	7,000 Hz
Power	Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Battery life	Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Capacity x Resolution	200 x 0.05 lbF 3200 x 1 ozF 100 x 0.02 kgF 1000 x 0.2 N 1 x 0.0002 kN
Outputs	USB / RS-232: Configurable up to 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 VDC, ±0.25% of full scale at capacity General purpose: Three open drain outputs, one input Set points: Three open drain lines
Safe overload	200% of full scale (display shows "OVER" at 110% and above)
Warranty	3 years (see individual statement for further details)

Downloads

---

Mark-10 Myometer Kit Series EKM5 - Data Sheet

Mark-10 Myometer Kit Series EKM5- Instruction Manual

Mark-10 Myometer Kit Series EKM5 - Ergo Gauge Comparison Chart