Name: Mark-10 F1505S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V
Brand: Mark-10
SKU: 2055
Price: 14700.00 USD
Availability: InStock

Mark-10 F1505S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V

See More Test Stands, Motorized

Rigid and precise by design

External limit switches

Easy-to-service electronics

This family of force testers is designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

line
Kit Contents
line

The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames are shipped as shown at left, and includes the following accessories:

Control panel, mounting bracket, and hardware
USB cable
Eye end kit for base Includes: eye end, anchor pin, (2) lock rings
2 Spanner wrench
Power cord
Allen wrench set
NIST-traceable certificate of calibration, force

line
Features
line

Rigid and precise by design
- Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
- Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
External limit switches
- Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Easy-to-service electronics
- Most electronics are housed in an integrated module, easily replaced without special tools or processes.

line
Specifications
line

	F755	F755S	F1505	F1505S
Load capacity1	750 lbF [3.4 kN]		1,500 lbF [6.7 kN]
Maximum travel	32.0 in [813 mm]	14.2 in [360 mm]	32 in [813 mm]	14.2 in [360 mm]
Speed range	0.001 - 60 in/min [0.02 - 1,525 mm/min]		0.001 - 70 in/min [0.02 - 1,800 mm/min]
Load accuracy (% of full scale)	Test frame + force sensor, calibrated together: ±0.1% Test frame alone: ±0.1% Force sensor alone: Series FS05: ±0.1% \| Series R07: ±0.15%
Speed setting accuracy	±0.2%
Load sampling rate	20,000 Hz
Data acquisition rate	1,000 Hz
Speed accuracy	±0%, stepper motor driven
Distance accuracy	±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution	0.0005 in [0.01 mm]
Limit switch repeatability	±0.001 in [0.03 mm]
Power	Universal input 100-240 VAC, 50/60 Hz, 300W		Universal input 100-240 VAC, 50/60 Hz, 450W
Fuse type	4A, 3AG, SLO BLO
Weight (test frame only)	184 lb [83 kg]	149 lb [68 kg]	197 lb [89 kg]	157 lb [71 kg]
Shipping weight	235 lb [107 kg]	195 lb [88 kg]	247 lb [112 kg]	205 lb [93 kg]
Environmental conditions	Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2
Warranty	3 years [see individual statement for further details]
Conformance	CE

Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
May be extended via single- or double-column extensions.

Model No.	HS Code	ECCN	Country of Origin
F755-IMT, -IM F755S-IMT, -IM F1505-IMT, -IM F1505S-IMT, -IM AC1093-1,-2 AC1093	9024900000	EAR99	USA
CERT-DS	9024800000	EAR99	USA

line
IntelliMESUR
line

IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

Limit testing to a load, break, or distance
Height measurement
Load holding
Cycle testing
Multi-step testing, utilizing any combination of the above functions

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.

Load Limit
Distance Limit
Break Limit
Load Hold
Cycle

line

Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:

Move to load
Move to distance
Move to break
Hold a load or position

Hold a load or position
Loop / cycle
Datum
Prompts
Save current load or position
Zero load or position
Return to Home position

line
Model Description
line

Test Frame + Pre-configured Tablet Control Panel

Model	Description
F755-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V*
F755S-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V*
F1505-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V*
F1505S-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V*

All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified.

line
Related Products
line

Mark-10 ESM303
High Performance Motorized Test Stand

Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min)
USB output of force vs. time or force vs. travel (with optional travel measurement)