Mark-10 F505-EM Force Test frame with EasyMESUR® control panel, vertical, 500 lbF / 2.2 kN Capacity

See More Test Stands, Motorized

Mark-10 F505-EM Force Test frame with EasyMESUR® control panel, vertical, 500 lbF / 2.2 kN Capacity

See More Test Stands, Motorized
Price:
$4,750.00
    warrenty

    Product Description
    EasyMESUR Tension and Compression Force Test Frame
    Capacities up to 500 lbs / 2.2 kN
    Force vs Distance Measurement, Break Detection, Load Holding, and many other features OPTIONAL
    Made in the USA, 3-Year Warranty

    4 Models
    F105 - 100 lb / 0.5 kN - Vertical
    F305 - 300 lb / 1.3 kN - Vertical
    F505 - 500 lb / 2.2 kN - Vertical
    F505H - 500 lb / 2.2 kN - Horizontal

    Load Cell and Grips Sold Separately

    The Mark-10 Easy MESUR-LR Tension and Compression Test Frame is engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.

    Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.

    Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

    Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.

    Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.

    Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.


    line
    Kit Contents
    line

    • The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories:
    • Control panel, mounting bracket, and hardware
    • #10-32M medium hook
    • 5/16-18M large hook
    • #10-32F 2” diameter compression plate
    • #10-32 F/F coupler
    • Adapter, 5/16-18M to #10-32F
    • Set screw, #10-32 x 3/4”
    • 2 Hex nut, #10-32
    • Power cord
    • Allen wrench set


    line
    Specifications
    line

    F105-EMF305-EMF505-EMF505H-EM
    Load capacity*100 lbF
    [0.5 kN]
    300 lbF
    [1.3 kN]
    500 lbF
    [2.2 kN]
    Maximum travel18.0 in | [457 mm]
    Standard speed range0.5 – 13 in/min | [13 – 330 mm/min]
    Optional speed range0.02 – 45 in/min | [0.5 – 1,100 mm/min]
    Load accuracy
    (% of full scale)
  • Test frame: ±0.1%
  • Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15%
  • Load sampling rate5,000 Hz
    Data acquisition rate100 Hz
    Speed accuracy±0.2% of setting, virtually no variation with load
    Position accuracy±0.006 in [0.15 mm], at any load or position
    Distance resolution0.001 in [0.02 mm]
    Limit switch repeatability±0.001 in [0.03 mm]
    Overload protectionMotor stops at 120% of full scale of the force sensor
    PowerUniversal input 100-240 VAC, 50/60 Hz, 120W
    Fuse type1.2 A, 250V, 3AG, SLO BLO
    Weight (test frame only)60 lb
    [27 kg]
    70 lb
    [32 kg]
    Shipping weight75 lb
    [34 kg]
    85 lb
    [39 kg]
    Environmental conditions
  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 - 95°F [5 - 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
  • ConformanceCE, UKCA
    Warranty3 years [see individual statement for further details]
    • * Load capacity is reduced at higher speeds, as follows:
      • F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
      • F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min
    Model No.HS CodeECCNCountry of Origin
    F105-EM
    F305-EM
    F505-EM
    F505H-EM
    AC1094-1,-2, -3
    AC1095-1,-2,-3
    9024900000EAR99USA
    AC1092-1,-2
    CERT-DS
    9024800000


    line
    Functions
    line

    Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.

    A complete options package (EMP-COMP-1) is also available, including all of the below features at a discounted price.

    The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation.

    Individual Functions
    FunctionPart No.DescriptionCo-requirements
    Distance MeasurementEMF001-1Measure distance, with the ability to zero the reading.-
    Distance LimitsEMF002-1Stop at user-defined upper and lower distance limits.- Distance Measurement (EMF001-1)
    PreloadEMF003-1Zero the travel position automatically at a user-defined preload value.- Distance Measurement (EMF001-1)
    High Speed ExtensionEMF004-1Extend the high end of the speed range, dependent upon test frame model.-
    Low Speed ExtensionEMF005-1Extend the low end of the speed range, dependent upon test frame model.-
    CyclingEMF006-1Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits.- If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1)
    Break DetectionEMF007-1Stop when a user-defined drop in force occurs.-
    Load HoldingEMF008-1Stop at, and maintain, a user-defined load for a specified period of time.-
    FollowMe®EMF009-1Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force.-
    Graphing & ReportingEMF010-1Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information.- If graphing load vs. distance, add Distance Measurement (EMF001-1)
    PC ControlEMF011-1Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls.- AC1107 cable, test frame to PC

    Packages
    PackagePart No.Includes
    Distance MeasurementEMP001-1
  • Distance Measurement (EMF001-1)
  • Distance Limits (EMF002-1)
  • Preload (EMF003-1)
  • Speed ExtensionEMP002-1
  • High Speed Extension (EMF004-1)
  • Low Speed Extension (EMF005-1)
  • Advanced FunctionalityEMP003-1
  • Cycling (EMF006-1)
  • Break Detection (EMF007-1)
  • Load Holding (EMF008-1)
  • FollowMe® (EMF009-1)
  • Complete OptionsEMP-COMP-1
  • All functions

  • line
    Related Products
    line

    Mark-10 Series FS05
    Tension and Compression Force Sensors

    • Force Sensors for use with Series F Test Frames
    • Capacities up to 500 lb / 2.5 kN
    related

    line

    Mark-10 Series FS06
    Tension and Compression Force Sensors

    • Measure tension and compression force
    • Suitable for larger and heavier grips and fixtures
    related

    line

    Mark-10 Series R07
    S-Beam Force Sensor

    related

    line

    Mark-10 AC1092
    Shields for Test Frames and Test Stands

    • Force Sensors for use with Series F Test Frames
    • Capacities up to 500 lb / 2.5 kN
    related


    line
    Downloads
    line

    Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Data Sheet
    Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Instruction Manual
    Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Comparison Chart

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $4,750.00
    Recommended Accessories PRICE
    $1,590.00
    $444.00
    $444.00
    $378.00
    $378.00
    $534.00
    $534.00
    $534.00
    $378.00
    $1,230.00
    $1,890.00
    $2,334.00
    $720.00
    $1,890.00
    $7,056.00
    $474.00
    $4,572.00
    $3,372.00