The Mark-10 F105 / F305 / F505 / F505H Series-F Advanced Force Test Stands is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.

Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

Kit Contents

Mark-10 Series-F IMT Advanced Force Test Stands Control panel, mounting bracket, and hardware Mounting bracket, column end (F505H only) USB cable #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 M/F 2” extension rod #10-32 F/F coupler Adapter, 5/16-18M to #10-32F Set screw, #10-32 x 3/4” Hex nut, #10-32 (2) Power cord Allen wrench set NIST-traceable certificate of calibration, force

Mark-10 Series-F IM Advanced Force Test Stands Mounting bracket, column end (F505H only) USB flash drive containing software installation files USB dongle USB cable #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 M/F 2” extension rod #10-32 F/F coupler Adapter, 5/16-18M to #10-32F Set screw, #10-32 x 3/4” Hex nut, #10-32 (2) Power cord Allen wrench set NIST-traceable certificate of calibration, force

Features

IntelliMESUR

IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

• Limit testing to a load, break, or distance
• Height measurement
• Load holding
• Cycle testing
• Multi-step testing, utilizing any combination of the above functions

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification. Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup. Load Limit Distance Limit Break Limit Load Hold Cycle

Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from: Move to load Move to distance Move to break Hold a load or position

Hold a load or position Loop / cycle Datum Prompts Save current load or position Zero load or position Return to Home position

Specifications

Force Ranges

• *Load capacity is reduced at higher speeds, as follows:
  • F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
  • F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min

Related Products

Mark-10 ESM303 High Performance Motorized Test Stand Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min) USB output of force vs. time or force vs. travel (with optional travel measurement)

Mark-10 Series FS05 Tension and Compression Force Sensors Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN

Downloads

Mark-10 Series F Advanced Force Test Stands - Brochure

Mark-10 Series F Advanced Force Test Stands - Instruction Manual

Mark-10 Series F / Series ESM - Comparison Chart