This product has been replaced by the Mark-10 Test Frames

---

Mark-10 TSFM-DC Advanced Motorized Test Stand

---

Force Gauge sold Separately

---

500lb Capacity

---

The Mark-10 TSFM-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the TSFM motorized test stand, including 500 lb (2200 N) force capacity, generous clearance and throat depth, rugged design, and more, stepper motor design that prevents speed variation with load, and more.

The Mark-10 TSFM-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features.

Kit Contents

Mark-10 TSFM-DC Advanced Motorized Torque Test Stand DC controller Controller connection cable Indicator mounting kit Encoder cable Column cap with hardware Allen wrench set Thumb screw for mounting indicator Power cord

Features

• Digital Angle Indication; Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.
• Programmable Angle Limits; The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.
• Overload Protection; Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.
• Auto-return; The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.
• Cycling / Dwell Time; Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.
• Programmable Button Functions; Programmable CW and CCW button functions - momentary motion, maintained motion, or auto.
• Independent CW and CCW Speeds; Configurable speeds for CW and CCW directions
• Selectable speed units of measurement (RPM and °/s)
• Password protection; Prevents unauthorized changes to controller settings.
• Computer Control; An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC

Specifications

Maximum Load	Standard: 100 lbFin [11.5 Nm] Optional: 200 lbFin [22.0 Nm]
Speed Range	Standard: 0.01 - 15 RPM [0.05 - 90°/s] Optional: 0.04 - 60 RPM [0.2 - 360°/s] *
Speed Accuracy	+/-0.2% of setting, +/-0% variation with load
Rotational travel accuracy	+/-0.7° / 0.02 rev.
Rotational travel repeatability	0.1° / 0.01 rev.
Rotational travel resolution	0.1° / 0.01 rev.
Throat	4.10" [104 mm]
Manual adjustment	12° / adjustment knob rev
Maximum slider travel	15.5" [394 mm]
Slider travel rate	1.047" [26.6 mm] / lever rev
Universal power supply	80-250 VAC
Operating Temperature Range	40 - 100°F, max. 96% humidity, non-condensating
Certifications	CE
Warranty	3-Years

*Maximum torque decreases proportionately with speed. Examples:
- Maximum torque at 60 RPM = 25 lbFin [2.8 Nm]
- Maximum torque at 30 RPM = 50 lbFin [5.6 Nm]

Downloads

TSFM-DC Advanced High Capactiy Motorized Test Stand - Data Sheet