This product has been replaced by the GEK Torque Wrench

---

Imada RGED Wireless Digital Torque Wrench

---

Available in ratchet and adjustable models

---

Accuracy: ±1.5% F.S. ±1 LSD

---

The Imada RGED Wireless Digital Torque Wrench transmits peak data up to 130 feet to the included Torque Management software. A single wireless receiver supports up to ten wireless ratchet or adjustable torque wrenches. Wrenches store up to 200 data when out of range. When back in range, turn the power off then on to upload stored data to the software. Torque Management software keeps a log of all measurements which can be exported in CSV format. 

The Imada RGED Wireless Digital Torque Wrench are built with forged steel ratchet heads, positive-lock drives and a 36 tooth gear with double claw ratchets which allows smaller movements between clicks or forged steel heads and specially designed jaws that maintain consistent working length whether the jaws are open or closed. The unique power sensor in the ergonomic handle accurately detects and analyzes load applied to the grip to enable precise torque measurement.

Imada RGED Wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable Go/No Go torque presets stored in memory enable users to check frequently used values.Presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of preset torque using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable lbf-in, lbf-ft, kgf-m, and N-m units. Uses a lithium ion Panasonic CR123A battery. Wireless receiver, GED-Z is included.

Kit Contents

Imada RGED Wireless Digital Torque Wrench Wireless receiver Torque Management software 2 two lithium ion batteries and charger Calibration certificate traceable to NIST Carrying case

Features

• Wirelessly transmit peak data to a PC up to 130 feet away
• One wireless receiver supports up to ten wrenches
• Store up to 200 data in memory for download
• Rechargeable battery with charger
• Five programmable Go/No Go torque presets
• Pass/Fail counter with high/low setpoints
• Selectable Units: lbf-in, kgf-cm, N-m
• Peak, peak with auto zero reset and Real Time modes
• High accuracy ±1.5% F.S. both CW and CCW

Specifications

Accuracy	±1.5% F.S. ±1 LSD
Measuring direction	CW and CCW
Measuring unit	Selectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory	5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFF	Power automatically turns off after 2 minutes of non-use
Battery	Lithium coin battery CR123A
Battery Life	Approx. 2 months (100 usages per day)

RGED Wireless Digital Ratchet Torque Wrench Ranges

Model	lbf - in	lbf - ft	kgf - m	N - m	Drive
RGED030 - R2Z	13.4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	1/4"
RGED030 - C3Z	13.4 - 265.4	1.12 - 22.12	0.160 - 3.060	1.50 - 30.00	3/8"
RGED060 - R3Z	13.5 - 531.0	1.15 - 44.25	0.160 - 6.120	1.50 - 60.00	3/8"
RGED085 - R3Z	19.0 - 7520	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0	3/8"
RGED135 - R4Z	28.0 - 1195.0	2.3 - 99.5	0.32 - 13.76	3.1 - 135.0	1/2"
RGED200 - R4Z	46.0 - 1770.0	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0	1/2"

RGED Wireless Digital Adjustable Torque Wrench Ranges

Models	lbf-in	lbf-ft	kgf-m	N-m
RGED085-W36Z	19.0 - 752.0	1.60 - 62.70	0.21 - 8.66	2.0 - 85.0
RGED135-W36Z	28.0 - 1195.0	2.3 - 99.5	0.32 - 13.76	3.1 - 135.0
RGED200-W36Z	46.0 - 1770.0	3.8 - 147.4	0.55 - 20.40	5.2 - 200.0

Downloads

Adjustable Torque Wrench Dimensional Drawing

Ratchet Torque Wrench Dimensional Drawing