Time TH170 Metal Hardness Tester

See More Durometers

Product Description

---

---

Model TH170

---

Portable Hardness Tester for Metals with USB Port

---

Wide measuring range in HLD and display of converted hardness values in Brinell, Rockwell, Leebs, Vickers and Shore

---

Test at any angle

TH170 Metal Hardness Tester

Features of the TH170 Metal Hardness Tester

	USB port for connecting to a computer		Includes software for data transfer
	User-friendly calibration procedure		Automatic identification of impact test direction
	Memory for 270 average data in 9 group files		Upper and lower limit setting
	Automatic shut off		Backlight for convenient use in darkness
	Battery capacity display		Two (2) AAA 1.5V batteries
	Computer software available		Wide measuring range in HLD and direct display of converted hardness values in HB, HRB, HRC, HV and HS
	Integrated impact device D: no cables!		Test at any angle
	For most metals (see table below)		Optional printer available
	Simple handling and low test expenditure

Measuring Ranges

Material	HLD	HRB	HRC	HB	HV	HS
Steel & cast steel	300- 900	38.4- 99.8	20.0- 68.4	81- 654	81- 955	32.5- 99.5
Cold work tool steel	300- 840		20.4- 67.1		80- 898
Stainless steel	300- 800	46.5- 101.7		85- 655	85- 802
Gray cast iron	360- 660			93- 334
Nodular cast iron	360- 660			131- 387
Cast aluminum	174- 560	23.8- 84.6		19- 164
Copper zinc alloys (brass)	200- 550	13.5- 95.3		40- 173
Copper tin alloys (bronze)	300- 700			60- 290
Copper	200- 690			45- 315

Complete Kit of the TH170 Metal Hardness Tester

The TH170 portable hardness tester kit includes the TH170 hardness tester with impact device D, standard test block, 1 large and 1 small support rings, cleaning brush, two (2) AAA batteries, software, communication cable, manufacturer's certificate of calibration, instruction manual & carrying case.

Specifications of the TH170 Metal Hardness Tester

Standard impact device:	D integrated
Hardness scales:	HLD, HB, HRC, HRB, HV & HS
Measuring range:	See measuring range table above
Measuring accuracy:	±6HLD of reading at LD=800
Repeatability:	±10HLD
Minimum sample weight:	5kg (11lbs)
(if coupled to solid support)	100g (3.5oz)
Minimum sample thickness:	5mm (0.2")
(if coupled to solid support)	3mm (0.12")
Minimum radius of surface:	30mm (1.2")
(with support rings)	11mm (0.4")
Minimum thickness of hardened surface:	0.8mm (0.03")
Maximum sample hardness:	900HLD
Automatic calculation:	Average test value
Onboard memory:	270 data in 9 group files
Impact direction:	0º, ±45º, ±90º, Auto
Test tip:	Tungsten carbide
Power supply:	2 x 1.5V AAA batteries
Operating temperature:	0-40ºC (32-104ºF)
Weight:	166g (5.9oz)
Dimensions:	155 x 55 x 25mm (6.1" x 2.1" x 1")

Buy Now

View Cart