Heavy Duty Tension Meter

---

12 Ranges 5kg up to 500kg

---

200% overload protection

---

Twelve (12) Ranges - Up to 500 Kg (1100 lbs)
Cable Diameters - Up tp 30 mm (1.25")

The new Honigmann 136-3 Heavy Duty Tension Meter is designed for use on larger diameter materials such as cables, large diameter wire, wire ropes and similar materials up to 30mm (1.25").

It is designed to minimize the effects of different material rigidities when measuring on a variety of material sizes and also features a unique "tritens" system where the material can be threaded through the 3 rollers in 3 distinct patterns.

Each threading pattern provides a different multiplying factor. For instance, assuming the Threading Pattern "D" below, (where all 3 rollers are on the same side), versus Threading Pattern "E", where one roller is on one side and 2 rollers are on the other side. Pattern "E" provides a multiplier of approximately 5x compared to threading Pattern "D".

This permits the user to use the most appropriate threading pattern based on the tensions required for a specific material. In other words, the same hand-held sensor can be considered to have 3 different capacities, (depending upon threading pattern "D", "E" or "F). For example, when using a 400 mm wide outer roller bracket.

• 100 Lb Capacity when using "D"
• 25 Lb Capacity when using "E"
• 15 Lb Capacity when using "F"

S6 Model for Tire Cord

For Tire Cord and similar applications, we offer our model S6 which features oversized 42 mm diameter V-Grooved rollers with ceramic plasma coating to withstand the high speeds, forces and abrasion normally found when measuring Tire Cord Tension.

Features

• One sensor for three measuring ranges Tritens®
• Minimal material deflection
• Easy material threading
• Tension ranges up to 500 Kg (1100 lbs)
• Unaffected by changes in material diameter and rigidity

Specifications

Accuracy	± 2% Full Scale, typical (depends on material and calibration)
Outer Roller Spacing (c:c)	350, 400 or 500 mm
Material Deflection	1.5 degrees
Guide Rollers	30 mm Dia., V-grooved or Dual-Radius U-Grooved
Roller Material	Aluminum, Steel, other depending upon application
Overload Protection	200% +
Calibration Certificate	Optional

Related Products

D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display

TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes

136-3P Carrier Rope Tension Meter Measures accurately on ropes of all diameters Water-resistant design

Downloads

Honigmann 136-3 Heavy Duty Tension Meter - Dimensional Drawing

Honigmann 136-3 Heavy Duty Tension Meter - Instruction Manual