Measurement principle

Solvent extraction-non-dispersive infrared absorption analysis method

Measurement range

0mg/L ~ 200mg/L

Resolution

0 to 99.9 mg/L; 0.1 mg/L
100 to 200 mg/L; 1 mg/L

Repeatability

0 to 9.9 mg/L; ± 0.4 mg/L ± 1 digit
10.0 to 99.9 mg/L; ± 2 mg/L ± 1 digit
100 to 200 mg/L; ± 4 mg/L ± 1 digit
*For standard liquids 

Display Method

3.5 inches, 320×240 dots
Backlight Color graphic LCD

Calibration Method

Select each optionally zero and span calibration

Extraction Solvent

S-316 solvent 
※Do not use any other solvent than S-316

Amount of extraction solvent required

Approx. 6.5ml (Amount of extraction solvent required)

Extraction Method

Using the extraction solvent and extracted manually outside the product

Ambient Operating Temperature

0 to 40 ℃ (non condensation)

Power supply

AC 100V to 240V ±10%, 50/60 Hz

Power consumption

AC 100V to 240V : Approx.60VA

External Dimensions

195(H)×253(W)×293(D) mm

Mass

Approx. 5 kg

External Output

Output to an USB memory stick

Functions

Residual oil components

• For quality control of components

For piping of air conditioners and refrigerator

• To prevent reduction of cooling function

Semiconductor field

• For evaluation of degreasing capability

Others

• Useful for soil (environmental pollution), food(health hazard) and gas(quality deterioration)

Horiba S-316 Extraction Solvent Oil - 5200100690

This solvent is required to:

• Prepare the calibration solution to calibrate the infrared Spectrometer OCMA: pure solvent (zero Calibration), solvent + oil (span calibration)
• Extract the oil and grease from the sample
• Perform the measurement by Infrared Abortion (NDIR)
• Clean the measurement cel

One bottle of S-316 allows performing up to 40 measurements* on a previously calibrated OCMA-550 analyzer

*Base on 20 ml per measurement (15 ml for extraction and 5ml for cell cleaning)