Imada MX2 High Performance Motorized Test Stand

---

Force Gauge sold Separately

---

110lb and 550lb Capacity

---

3 Capacities Available:
Imada MX2-110 - 110 lbs / 50 Kg / 500 N
Imada MX2-275 - 275 lbs / 125 Kg / 1250 N
Imada MX2-550 - 550 lbs / 250 Kg / 2500 N

High Performance, Force Control, Motorized Test Stand with Speed Control, Timer & Cycle Counter

Imada MX2 Vertical Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.

Precise Increment Mode

MX2 features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .015mm for MX2-110, .01mm for MX2-275 and .05mm for MX2-550 (standard speed, under no load).

Cycle Mode

MX2 Program dial and LCD interface In cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Control start and return speeds independently.

Force Control

Force controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the MX2 test stand to enable the following force controlled tests and Conditional Overload Prevention.

Maintain Force Between High/Low Setpoints

Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.

Increase Force to High Setpoint and Stop

Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached

Features

• Ultra rigid, .5mm deflection at maximum load
• Wide speed range: 0.4 – 11.8 in/min (optional speed ranges available)
• Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectable
• Force Controlled operation with Imada Z Series force gauges
• Easy-to-use program dial and menu screens control mode, speed, timer and cycles
• Optional digital distance meter available
• Programmable timer up to 99' 59.9 sec in 0.1 sec increments
• Conditional Overload Prevention
• One stand for both compression (push) and tension (pull) tests
• Max clearance 9" (with extender 14")

Specifications

Speed Ranges

Related Products

ZP Digital Force Gauge with USB Output USB, RS-232C, and Analog outputs

Z2 Digital Force Gauge Output signals (RS 232 C, analog and Mitutoyo Digimatic)

Downloads

Imada MX2 High Performance Motorized Test Stand - Instruction Manual

Imada MX2 High Performance Motorized Test Stand - MX2-110 Dimensions

Imada MX2 High Performance Motorized Test Stand - MX2-275 Dimensions

Imada MX2 High Performance Motorized Test Stand - MX2-550 Dimensions