Name: Mark-10 WTT-1000-CG 1000Lb Capacity Pull Test System with Stand, Gauge, Wedge grip and Cam Grip
Rating: 5.0 (1 reviews)

Mark-10 WTT-1000 Wire Pull Tester 1000 lb Capacity

See More Wire Terminal Pull Testers

Mark-10 WTT-1000 Wire Pull Tester 1000 lb Capacity

Supplied with Heavy-Duty Wedge Grips

The Mark-10 WTT-1000 system is designed for testing large diameter wires for UL and MIL Spec Testing.

Available with a set of heavy-duty self-tightening wedge grips or a combination of wedge grip and vise grip to securely hold your samples. A hook is also included which can be used to grip ring terminals.

Measurement accuracy is ±0.1% of full scale, and resolution is 0.5 lbs / 0.2 Kg / 2 N. A large, backlit LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.

On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.

line
Kit Contents
line

The WTT-1000-VG is sold as a complete test system that includes the following items;

TSF - High Capacity Test Stand
M5-1000 - Digital Force Gauge
G1061 - Wedge Grip
G1074 - Vice Grip

The WTT-1000-WG is sold as a complete test system that includes the following items;

TSF - High Capacity Test Stand
M5-1000 - Digital Force Gauge
G1061 - Wedge Grip (x2)

line
Features
line

Display force values in peak or real-time measuring mode
Test for UL 486 & Mil Spec and other standards
3 Year Warranty
Includes Traceable Calibration Certificate
Modular system can be used for many other tension and compression testing applications
USB, RS-232, Mitutoyo, and analog output
Peak readings and set points always displayed
13 inches of clearance without grips. 4 inches of travel

line

line Specifications

Capacity	1,000lbs (4.5Kn)
Stroke	4.00" (102 mm)
Travel Rate	0.013" (0.34 mm)/wheel rev
Sampling Rate	7,000 Hz
Accuracy	± 1lbs / 0.5 Kg / 5 N
Power	AC or rechargeable battery (NiMH). Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage.
Battery Life	Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Measurement Units	lbF,ozF,gF,kgF,N,kN,mN (depending on model)
Outputs	USB / RS-232: Fully configurable up to 115,200 baud. Includes Gauge Control Language 2 for full computer control. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatibile devices. Analog: ±1V DC, ±0.25% of full scale at capacity. General Purpose: Three open drain outputs, one input. Set Points: Three open drain lines.
Configurable settings	Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration
Safe Overload	150% of full scale (display shows "OVLD" at 110% and above)
Warrany	3 years