Name: Tramex CCIK Concrete Coatings Inspector Kit
Brand: Tramex
SKU: 1909
Price: 1260.00 USD
Availability: InStock

Tramex CCIK Concrete Coatings Inspector Kit

See More Tramex Moisture Meters

Tramex CCIK Concrete Coatings Inspector Kit

Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration

The Tramex CCIK Concrete Coatings Inspector Kit is a compact kit for instant and precise moisture testing of concrete floors and slabs. The Tramex CMEX5 Concrete Moisture Encounter X5 allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. Non-destructive testing of the top ¾" of the slab is most critical when applying coatings. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Concrete Coatings Inspector Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

line
Kit Contents
line

line
Specifications
line

Kit:

Size	17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm)
Weight	6.8 lbs (3.1kg)
Power	2 x AA batteries, 1 x 9 volt PP3 battery

Tramex CMEX5 Concrete Moisture Encounter X5

Moisture content for Concrete	0 → 6.9 %
Comparative for Gypsum floor screed	0 → 12
CM Equiv Anhydrite/Concrete	0→2.7 / 0→ 4.3
Reference scale	0 → 100
Relative Humidity	0 → 99% (with optional Hygro-i2 ® probe)
Humidity accuracy	0% → 99%RH ± 2% @ 25°C / 77°F
Moisture content for wood	5→ 30 % (with optional wood pin probes)
Construction	ABS Body
Power	2 x AALR6 ALKALINE (included)
Display	Digital
Depth of penetration in concrete	approx. ¾" (20mm)

Tramex IRT2 Infrared Surface Thermometer

Temperature range	-58°F ~ 1202°F (-50 to 650 °C)
Distance to Spot ratio	D:S = 12:1
Display resolution	0.1 °F(0.1°C) <1000 1°C >1000
Accuracy for targets	Assumes ambient operating temperature of 73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C) ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C) ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5%
Repeatability	-58~68°F (-50~20°C) : ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C)
Response time	150ms
Spectral response	8~14um
Emissivity	Digitally adjustable from 0.10 to 1.0
Over range indication	LCD will show "----"
Polarity: Automatic (no indication for positive polarity)	Minus (-) sign for negative polarity
Diode laser output	<1mW,Wavelength 630~670nm, Class 2 laser product
Operating temp.	32 to 122°F ( 0 to 50°C)
Storage temp.	14 to 140°F (-10 to 60°C)
Relative humidity	10%~90%RH operating, <80%RH storage
Power supply	9V battery, NEDA 1604A or IEC 6LR61, or equivalent
Safety	"CE" Comply with EMC

line
Related Products
line

Tramex Hygro-i2 Relative Humidity Probe

Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test

line

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex CALCRH Calibration Check for CME5, CMEX5

The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab.

line

Tramex HA21SP52 Hammer-Action Pin-Type Electrode

Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3.
Order Code: HA21SP52 (For use with MRH3)
Order Code: HA21SP52B (For use with CMEX5)

line

Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200

Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH
Order Code: HH14SP200 For use with MRH3
Order Code: HH14SP200B For use with CMEX5

line

Tramex CALCRH Calibration Check for CME5, CMEX5

Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3
Order Code: HH14SP90 For use with MRH3
Order Code: HH14SP90 For use with CMEX5

line

Tramex ASTM F2170 Accessory Pack

Accessory Pack for RH testing
The AP-F2170-B for use with the: CMEX5 and DL-RHTX
The AP-F2170 for use with the: CMEX2 and MRH3

line

Tramex Extension Handle for ME5, CME5 and CMEX5

The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
Order Code: E5-HBS