This product has been replaced by the Tramex FMK
Perform multiple tests simultaneously
Backlit display for ease of reading in low level lighting
The Tramex CIK5.1 Concrete Inspection Kit is a complete kit for testing concrete moisture per ASTM F2659 & ASTM F2170. The Tramex CIK5.1 features the Tramex CMEX II moisture meter and Tramex Hygro-i2 ® relative humidity probes. The Concrete Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining
Photo Gallery
Features
- Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
- Fastest, most reliable Hygro-i ® RH probe for testing to ASTM F2170.
- Perform multiple tests simultaneously.
- Re-usable Hygro-i2 ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
- Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
- Backlit display for ease of reading in low-level lighting.
- Check calibration of RH probes as often as required by standards.
- Instant surface temperature readings to avoid condensation
Kit Contents
- CMEX II - concrete meter
- 4 x Hygro-i2 ® Relative Humidity probe
- 12 x Hole liners
- 1 x SAL75 ( Calibration Check Salts)
- Infrared thermometer
Specifications
| Size | 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm) | | Weight | 7.2lbs (3.3kg) | | Power | 2 x 9 volt PP3 | | Battery | Included | | Measuring Range | | Depth of penetration in concrete | (NDT*) approx. ¾" (20 mm) | | Moisture content for concrete | (NDT*) 0 to 6.9 % | | Comparative for Gypsum floor screed | (NDT*) 0 to 10 | | Reference scale | (NDT*) 0 to 100 | | Relative Humidity with Hygro-i2 ® probe | 0 to 99% | | Humidity accuracy | 0% to 99%RH +/- 2% @ 25°C / 77°F *NDT - Non-destructive Test | *NDT - Non-destructive Test
Video
Related Products
Tramex Hygro-i
Probe - Pack of 1 with Electronic Interface HIPP1-IE - The all new Tramex Hygro-i2 ® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2 ® probe provides measurements of humidity, temperature and dew-point in structural materials
Tramex SAL75
Calibration Salt Check - Calibration Salt Check for Hygro-i probes. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i ® RH probe is optimum
Downloads
|
|
