Tramex CMK5.1 Concrete Inspection Master Kit

See More Tramex Moisture Meters

Tramex CMK5.1 Concrete Inspection Master Kit

Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration.

Measuring Range: Moisture Content of Concrete (NDT): 0 to 6.9 % (moisture by weight), Gypsum Scale: 0 to 10 (comparative), Relative Humidity: 0 to 99%

The Tramex CMK5.1 Concrete Inspection Master Kit is a complete kit for testing per ASTM F2659 & ASTM F2170. The Tramex CMK5.1 features the Tramex CMEX II moisture meter and Tramex Hygro-i2 ® relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining

line
Photo Gallery
line

line
Features
line

Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
Fastest, most reliable Hygro-i2 ® RH probe for testing to ASTM F2170.
Perform multiple tests simultaneously.
Re-usable Hygro-i2 ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
Backlit display for ease of reading in low level lighting.
Check calibration of RH probes as often as required by standards.
Instant surface temperature readings to avoid condensation.

line
Kit Contents
line

CMEX II - concrete meter
12 x Hygro-i2 ® Relative Humidity probe
25 x Hole liners
3 x SAL75 ( Calibration Check Salts)
Infrared thermometer

line
Specifications
line

Depth of penetration in concrete	(NDT*) approx. ¾" (20 mm)
Moisture content for concrete	(NDT*) 0 to 6.9 %
Comparative for Gypsum floor screed	(NDT*) 0 to 10
Reference scale	(NDT*) 0 to 100
Relative Humidity with Hygro-i2 ® probe	0 to 99%
Humidity accuracy	0% to 99%RH +/- 2% @ 25°C / 77°F *

*NDT - Non-destructive Test

line
Video
line

line
Related Products
line

Tramex CMEX2
CMEXpert II Concrete Moisture Encounter Expert CMEX II

A digital version of the CME4 handheld electronic moisture meter, the Tramex CMEX II moisture meter is designed for the instant and precise measurement of moisture content in concrete and other floors and screeds.

line

Tramex RHIE
Hygro-i Electronic Interface Cable

Tramex RHIE Hygro-i ® Electronic Interface to connect to CMEX2, WME & MRH3 non-destructive moisture meters

line

Tramex Hygro-i
Probe - Pack of 1 with Electronic Interface HIPP1-IE

The all new Tramex Hygro-i2 ® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2 ® probe provides measurements of humidity, temperature and dew-point in structural materials

line

Tramex IRT2
Infrared Surface Thermometer