Tramex RIK Roofing Inspector Kit

See More Tramex Moisture Meters

Tramex RIK Roofing Inspector Kit

See More Tramex Moisture Meters
Price:
$3,900.00
  • Hassle Free 30-Day Returns
  • Availability: In Stock Usually ships within 1-2 business days
  • FREE - Standard Ground 3-5 Business Days View Faster Delivery Options
warrenty

Product Description
Tramex RIK Roofing Inspector Kit
Non-destructive checking of moisture conditions in roofing

The Tramex RIK Roofing Inspector Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth with the Tramex RWS Roof Moisture Meter and Wet Wall Scanner. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 Concrete Moisture Encounter X5 and probes. An infrared surface thermometer gives surface temperature. The Roofing Inspector Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining.


line
Kit Contents
line


line
Specifications
line

Kit:

Size19.2" x 14.9" x 5.7" (487mm x 380mm x 145mm)
Weight9.9 lbs (4.51kg)
Power2 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE (Included)


Tramex RWS Roof Moisture Meter and Wet Wall Scanner

ConstructionABS Body Power: 9 volt PP3
BatteryIncluded
DisplayAnalog Depth of penetration: 4" (100mm)
Sensitivity Four RangesRoofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity
LimitationsSome EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes


Tramex CMEX5 Concrete Moisture Encounter X5

Moisture content for Concrete0 → 6.9 %
Comparative for Gypsum floor screed0 → 12
CM Equiv Anhydrite/Concrete0→2.7 / 0→ 4.3
Reference scale0 → 100
Relative Humidity0 → 99% (with optional Hygro-i2 ® probe)
Humidity accuracy0% → 99%RH ± 2% @ 25°C / 77°F
Moisture content for wood5→ 30 % (with optional wood pin probes)
ConstructionABS Body
Power2 x AALR6 ALKALINE (included)
DisplayDigital
Depth of penetration in concreteapprox. ¾" (20mm)


Tramex IRT2 Infrared Surface Thermometer

Temperature range

-58°F ~ 1202°F (-50 to 650 °C) 
Distance to Spot ratioD:S = 12:1
Display resolution0.1 °F(0.1°C)   <1000 1°C   >1000

Accuracy for targets

Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5%

Repeatability

-58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C)

Response time

150ms

Spectral response

8~14um

Emissivity

Digitally adjustable from 0.10 to 1.0

Over range indication

LCD will show "----"

Polarity: Automatic (no indication for positive polarity)

Minus (-) sign for negative polarity

Diode laser output

<1mW,Wavelength 630~670nm, Class 2 laser product

Operating temp.

32 to 122°F ( 0 to 50°C)

Storage temp.

14 to 140°F (-10 to 60°C)

Relative humidity

10%~90%RH operating, <80%RH storage

Power supply

9V battery, NEDA 1604A or IEC 6LR61, or equivalent

Safety"CE" Comply with EMC


line
Related Products
line

Tramex Hygro-i2 Relative Humidity Probe

  • Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
related

line

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins

  • For use with CMEX5, CMEX2, MRH3 & PTM.
  • Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HH14TP30B (For use with CMEX5)
related

line

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X

  • For use with CMEX5, CMEX2, MRH3 & PTM.
  • Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HH14TP30B (For use with CMEX5)
related

line

Tramex CALCRH Calibration Check for CME5, CMEX5

  • The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab.

related

line

Tramex HA21SP52 Hammer-Action Pin-Type Electrode

  • Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3.
  • Order Code: HA21SP52 (For use with MRH3)
  • Order Code: HA21SP52B (For use with CMEX5)
related

line

Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200

  • Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH
  • Order Code: HH14SP200 For use with MRH3
  • Order Code: HH14SP200B For use with CMEX5
related

line

Tramex CALCRH Calibration Check for CME5, CMEX5

  • Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3
  • Order Code: HH14SP90 For use with MRH3
  • Order Code: HH14SP90 For use with CMEX5
related

line

Tramex ASTM F2170 Accessory Pack

  • Accessory Pack for RH testing
  • The AP-F2170-B for use with the: CMEX5 and DL-RHTX
  • The AP-F2170 for use with the: CMEX2 and MRH3
related

line


Tramex Extension Handle for ME5, CME5 and CMEX5 

  • The Extension Handle can be used with the ME5CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
  • Order Code: E5-HBS
related


line
Downloads
line

Tramex RIK Roof Inspector Kit - Data Sheet
Tramex RWS Roof and Wall Scanner - Quick Guide
Tramex RWS Roof and Wall Scanner - Instruction Manual
Tramex RWS Roof and Wall Scanner - Data Sheet
Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet
Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual
Tramex IRT2 Infrared Surface Thermometer - Data Sheet
Tramex Meters App - Visualizing, Photographing and Geo-tagging
Accessories for Tramex Moisture Meters - Online Catalog

ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
Models Price
$3,900.00