Name: Tramex RMK Roof Master Kit
Brand: Tramex
SKU: 1911
Price: 11710.00 USD
Availability: InStock

Tramex RMK Roof Master Kit

See More Tramex Moisture Meters

Tramex RIK Roofing Inspector Kit

Non-destructive checking of moisture conditions in roofing

The Tramex RMK Roof Master Kit is a complete kit for the Roofing Professional, including the Dec Scanner and the Tramex RWS Roof Moisture Meter and Wet Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches (152mm) in depth. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 Concrete Moisture Encounter X5 and probes. An infrared surface thermometer gives surface temperature. This kit comes in a protective heavy-duty wheeled carry case with die-cut foam lining. The Roof Master Kit is used to perform ASTM D7954.

line
Kit Contents
line

line
Specifications
line

Kit:

Size	41.2" x 21.1" x 12" (1045mm x 535mm x 305mm)
Weight	59.5lbs (27kg)
Power	4 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE Batteries (included)

Tramex DSAL Dec Scanner Moisture Scanner for Roofing

Size	30”W x 15¾“D x 6¼”H (762 mm x 400 mm x 158 mm)
Scanning area	24”W x 15.5”D (609 mm x 394mm)
Carry case	38”W x 20”D x 12”H (940mm x 508 mm x 305mm)
Weight Dec Scanner	24.6 lbs (9.95 Kg)
Weight Carry Case	21.9 lbs (9.9 Kg)
Total Weight Dec Scanner in Carry Case	46.5 lbs (21.1 Kg)
Outer packaging carton weight	4.4 lbs (2 Kg)
Total shipping weight	51 lbs (23.1Kg)
Dimensional shipping weight	66 lbs (30 Kg)
Display	Analog Measuring Range: 0 to 100
Comparative Max. depth of penetration	6” (152 mm)
Power Supply	2 x 9 Volt PP3 Batteries (included)
Limitations	Some EPDM, Butyl rubber roofing and other conductive roofing

Tramex RWS Roof Moisture Meter and Wet Wall Scanner

Construction	ABS Body Power: 9 volt PP3
Battery	Included
Display	Analog Depth of penetration: 4" (100mm)
Sensitivity Four Ranges	Roofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity
Limitations	Some EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes

Tramex CMEX5 Concrete Moisture Encounter X5

Moisture content for Concrete	0 → 6.9 %
Comparative for Gypsum floor screed	0 → 12
CM Equiv Anhydrite/Concrete	0→2.7 / 0→ 4.3
Reference scale	0 → 100
Relative Humidity	0 → 99% (with optional Hygro-i2 ® probe)
Humidity accuracy	0% → 99%RH ± 2% @ 25°C / 77°F
Moisture content for wood	5→ 30 % (with optional wood pin probes)
Construction	ABS Body
Power	2 x AALR6 ALKALINE (included)
Display	Digital
Depth of penetration in concrete	approx. ¾" (20mm)

Tramex IRT2 Infrared Surface Thermometer

Temperature range	-58°F ~ 1202°F (-50 to 650 °C)
Distance to Spot ratio	D:S = 12:1
Display resolution	0.1 °F(0.1°C) <1000 1°C >1000
Accuracy for targets	Assumes ambient operating temperature of 73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C) ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C) ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5%
Repeatability	-58~68°F (-50~20°C) : ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C)
Response time	150ms
Spectral response	8~14um
Emissivity	Digitally adjustable from 0.10 to 1.0
Over range indication	LCD will show "----"
Polarity: Automatic (no indication for positive polarity)	Minus (-) sign for negative polarity
Diode laser output	<1mW,Wavelength 630~670nm, Class 2 laser product
Operating temp.	32 to 122°F ( 0 to 50°C)
Storage temp.	14 to 140°F (-10 to 60°C)
Relative humidity	10%~90%RH operating, <80%RH storage
Power supply	9V battery, NEDA 1604A or IEC 6LR61, or equivalent
Safety	"CE" Comply with EMC

line
Related Products
line

Tramex Hygro-i2 Relative Humidity Probe

Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test

line

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex CALCRH Calibration Check for CME5, CMEX5

The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab.

line

Tramex HA21SP52 Hammer-Action Pin-Type Electrode

Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3.
Order Code: HA21SP52 (For use with MRH3)
Order Code: HA21SP52B (For use with CMEX5)

line

Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200

Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH
Order Code: HH14SP200 For use with MRH3
Order Code: HH14SP200B For use with CMEX5

line

Tramex CALCRH Calibration Check for CME5, CMEX5

Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3
Order Code: HH14SP90 For use with MRH3
Order Code: HH14SP90 For use with CMEX5

line

Tramex ASTM F2170 Accessory Pack

Accessory Pack for RH testing
The AP-F2170-B for use with the: CMEX5 and DL-RHTX
The AP-F2170 for use with the: CMEX2 and MRH3

line

Tramex Extension Handle for ME5, CME5 and CMEX5

The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
Order Code: E5-HBS