Fast acclimation time
Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
Best in class accuracy, even at high RH >90%
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with ASTM F2170 for the flooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind in concrete moisture meters to a whole new level.
Features
- Fast acclimation time
- Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
- Best in class accuracy, even at high RH >90%
- Proven robustness, durability and reliability
- Accurate, durable and best in class
- Testing per ASTM F2170, giving in situ relative humidity and ambient RH, temperature, dew point temperature & grains per pound
- Relative Humidity range: 0% to 100%
- Fastest Temperature response time
- Best temperature accuracy of +/-2º over 32ºF to 194ºF (0ºC to 90 ºC)
- Temperature Range: -40ºF to 257ºF (-40ºC to 125ºC)
Specifications
| Relative Humidity Sensor Specifications |
| Range | 0 to 100%RH |
| Accuracy | 0% to 99%RH ±2.0%RH (@ 77ºF (25ºC)) |
| Resolution | 0.1% over the complete range |
| Drift | <0.25%RH per year |
| Temperature Sensor Specifications |
| Range | -40ºF to 257ºF (-40ºC to 125ºC) |
| Accuracy | ±0.1ºF |
| Range | 68ºF to 140ºF (±0.1 °C Range 20°C to 60°C) |
| Sensor Protection | PTFE Film protects sensor opening from water & dust Drift: <0.04ºF (0.03ºC) per year NIST traceable. (National Institute of Standards and Technology) |
| Product Order Code |
| RHIE2 | For use with CMEX2 and MRH3 |
| RHIE2B | For use with Feedback DL-RHTX and CMEX5 |
More Info
Hygro-i2 Probes are available in packs 1, 3, 6, 12, 25, 50 and 100. Product Codes HIPP1, HIPP3, HIPP6, HIPP12, HIPP25, HIPP50, HIPP100.
Please note that the Tramex Hygro-I Electronic Interface Cable RHIE2 is needed to connect the Hygro-i2 Probe.
Desing
Used in conjunction with the Tramex Tramex CMEX5 Concrete Moisture Encounter X5, CMEX2,Tramex MRH III Moisture and Humidity Meter or the Tramex DL-RHTX Feedback DataLogger, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.
The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the Tramex SAL75 Calibration Salt Check.
Related Products
Tramex FBSK5.1 Feedback Datalogger Starter Kit - Bluetooth BLE enabled for use with mobile devices
- With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF.
| |
Tramex FBZK5.1 Feedback Datalogger EZ Kit - Ambient Relative Humidity, Temperature, Dew point, Grains per pound
- In Situ Relative Humidity, Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe)
| |
Tramex DL-RHTX Feedback DataLogger - Bluetooth BLE enabled for use with mobile devices
- Up to 100,000 data point entries. Instant set up and start modes
- Precise Ambient Relative Humidity and Temperature logging
| |
Tramex DL-RHTA Feedback DataLogger - Bluetooth BLE enabled for use with mobile devices
- Up to 100,000 data point entries. Instant set up and start modes
- Precise Ambient Relative Humidity and Temperature logging
| |
Downloads
