Tramex MRH III (MRH3) Tramex Moisture & Humidity Meter

---

Moisture testing of wood, drywall, masonry, roofing and other construction materials

---

Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface

---

The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. It also attaches to an optional plug-in Tramex Hygro-i2 ® relative humidity probe and heavy-duty pin type electrodes. Suitable for many industries including Water Damage Restoration, Flooring, Indoor Air Quality, Home Inspection and Pest Control.

Kit Contents

Tramex MRH III Moisture and Humidity Meter One (1) year warranty

Features

• Digital, non-destructive moisture meter.
• Deep signal penetration to over 25mm (1") into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
• Specific gravity adjustment for wood species. 
• External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.  
• Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.
• Backlit, large, clear, easy to read LCD display.  
• “Hold” function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible.
• Switchable "On" or "Off" audio warning tone.    
• Automatic power cutoff switches "Off" when not in use.
• Automatic default to last user setting when switched back on.
• Battery operated (included).
• Attaches to plug-in wood probe (optional).
• Attaches to plug-in Tramex Hygro-i2 ® relative humidity probe for relative humidity, temperature, dew point and mixing ratio readings (optional).

Specifications

Size	6" x 3.5" x 1.5" (150mm x 85mm x 38mm)
Weight	8.47oz (240g)
Construction	ABS
Body Power	9 volt PP3
Battery	Included
Display	Digital / Backlit Depth of penetration: up to 1¼"(30mm)(In wood, drywall)
Reference scale for building materials	0 to 100
Relative Humidity (with optional Hygro-i2 ® probe)	0 to 99%
Wood Non-invasive Mode	5 to 55% MC (at SG of 0.3)
Wood Invasive Mode (with optional wood pin probes)	7 to 40%MC

More Info

Desing

The Tramex MRH III Moisture and Humidity Meter operates on the principal of non-destructive impedance measurement. Co-planar electrodes are fitted on the base of the instrument from which low frequency signals are transmitted into the material under test, measuring the change in impedance caused by the presence of moisture. This reading is translated by the instrument into a moisture content reading.

Hygrometer mode:

When the Tramex Hygro-i2 Relative Humidity Probe is plugged into the Tramex MRH III Moisture and Humidity Meter, it automatically changes to Hygrometer Mode. The Tramex Hygro-i2 Relative Humidity Probe provides the ideal solution for measurements of ambient relative humidity, temperature and dew point conditions within the building structure and in structural materials such as concrete flooring, walls etc.

Related Products

Tramex BSIZK5.1 Building Survey Inspection EZ Kit Audio signal sounds when meter indicates high readings Large clear backlit digital display giving meaningful readings

Tramex BSIK5.1 Building Survey Inspection Kit All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary

Tramex BSMK5.1 Building Survey Master Kit A complete kit featuring the RWS Roof & Wall Scanner for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems The Building Survey Master Kit features the multifunctional Tramex MRH3 digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing

Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5)

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5)

Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5)

Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5

Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5

Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3

Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS

Downloads

Tramex MRH III Moisture & Humidity Meter - Quick Guide

Tramex MRH III Moisture & Humidity Meter - Instruction Manual

Tramex MRH III Moisture & Humidity Meter - Data Sheet

Accessories for Tramex Moisture Meters - Online Catalog