Mountz RDA Run Down Adapters for Torque Testers

---

The Mountz run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools.

---

Available in capacities up to 5000 Lb-ft / 6780 Nm

---

Mountz RDA Run Down Adapters for Torque Testers are designed to provide consistent and reliable torque readings when testing power driven torque control tools. RDA’sreduce the impact and irregular peaks that cause poor repeatability. Each Mountz RDA has an effective torque range and will provide repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer.

Features

• Designed to provide consistent and reliable torque readings for use with power driven torque control tools.
• Adapter is mounted in-line between tool drive and transducer.
• Hardened thread components, increase accuracy and life.
• Square drives conform to ASME B107 standards for proper fit.
• Non-rotating body for improved safety.
• Compact size and lightweight.
• Operates in clockwise direction only. After each run down, the RDA should be completely backed-up

Torque Ranges

Model	Capacity*	Square Drive (M/F)
RDA-10i	10 Lb-in / 113 N-cm	1/4"
RDA-25i	25 Lb-in / 282 N-cm	1/4"
RDA-50i	50 Lb-in / 5.6 Nm	1/4"
RDA-100i	100 Lb-in / 11 Nm	1/4"
RDA-250i	250 Lb-in / 28 Nm	1/4"
RDA-750i	750 Lb-in / 85 Nm	3/8"
RDA-50F	50 lb-ft / 68 Nm	3/8"
RDA-100F	100 Lb-ft / 135 Nm	1/2"
RDA-250F	250 Lb-ft / 340 Nm	1/2"
RDA-500F	500 Lb-ft / 677 Nm	3/4"
RDA-1000F	1000 Lb-ft / 1355 Nm	1"
RDA-2500F	2500 Lb-ft / 3390 Nm	1 1/2"
RDA-5000F	5000 Lb-ft / 6780 Nm	1 1/2"

Related Products

Mountz RTU Dynamic Torque Limiter Ranges up to 124 lb-in / 10 Nm