Price: $240.00 - $385.00

---

Testex Micrometer Dial Thickness Gauge

---

To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.

---

Price: $350.00 - $440.00

---

Using Testex Replica Tape even easier

---

Tom-designed to be the optimal tool for measuring replica tape

---

Makes taking measurements and creating reports easier than ever

---

Price: $38.00 - $5,700.00

---

Same trusted Coarse and X-Coarse replica foam in new strip format

---

Simple technique: place on the surface, press/burnish it into the surface, remove, and measure

---

Proven technique with accuracy and repeatability validated by numerous independent studies

---

Less than 30 seconds required per test

---

Price: $42.00 - $2,100.00

---

Testex X-Coarse Grade Press-O-Film Replica Tape

---

Range: 1.5 to 4.5 mils / 38 to 115 microns

---

Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.

---

Price: $42.00 - $1,050.00

---

Testex X-Coarse Plus Grade Press-O-Film Replica Tape

---

Range: 4.6 to 5.0 mils / 116 to 127 microns

---

Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.

---

Price: $42.00 - $1,050.00

---

Testex Coarse Grade Press-O-Film Replica Tape

---

Range: 0.8 to 2.5 mils / 20 to 64 microns

---

Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.

---

Price: $38.00

---

Testex Coarse Minus Grade Press-O-Film Replica Tape

---

Range: 0.5 to 1.0 mils / 12 to 25 microns

---

Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.

---

Price: $240.00 - $385.00

---

Testex Micrometer Dial Thickness Gauge

---

To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.

---

Price: $350.00 - $440.00

---

Using Testex Replica Tape even easier

---

Tom-designed to be the optimal tool for measuring replica tape

---

Makes taking measurements and creating reports easier than ever

---

---

Testex Medium Grade Press-O-Film Replica Tape

---

Range: 5 to 75 microinch / 0.1 to 2 microns

---

Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.

---