DTSE - Limited-Access, Hand-Held Digital Tension Meter

See More Tension Meters, Digital

4 Tension Ranges 1-200g up to 20-2000g

For measurement in areas with limited space or tightly grouped filaments

For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter

4 Tension Ranges 1-200g up to 20-2000g

Small measuring head with miniature rollers for applications with limited access space or where filaments run close together. For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter

line
Kit Contents
line

DTSE - Limited-Access, Hand-Held Digital Tension Meter
AC adapter
Certificate of compliance with the order 2.1 according EN 10204 free of charge
Instruction manual
Carrying case

line
Features
line

Small measuring head of 64mm x 36 mm for measurements with limited access space
Small, ball-bearing mounted, hardcoat anodized aluminum V-grooved rollers
Rollers suitable for material speeds up to 900 m/min (2000 m/min with "K" option)
Large, backlight LCD-display rotates in 90° steps for optimal viewing
3 different display modes:
- numeric
- numeric with bargraph
- numeric with graph (Time-Tension)
Automatic "Zero-Setting“ in each measuring position
4 Material Calibration locations for customer calibrations
User-set Min and Max alarms with indication on LCD if reading is out of limits
High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks
Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation
User-Selectable units of measurement: cN, daN, g, kg, N, lb
Rugged aluminium housing with rubberized handle provides a secure and comfortable grip
Setup parameters can be password protected so they are not accidentally changed by the user
Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation
CE certified with 1-Year Warranty
NIST-Traceable Calibration Certification in optionally available

line
Specifications
line

Calibration	According to factory procedure
Accuracy	For PA from 5 % up to 100 % FS: ± 0.5 % FS ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit
Memory for material curves	1 for factory calibration plus 4 for customized calibrations
Measuring units	Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected)
Overrange	Approx. 10 % FS*, full scale, without accuracy guarantee
Overload protection	100 % full scale
Measuring principle	Strain gauge bridge
Signal processing	Digital, 16 bit A/D converter
Measuring frequency	Max. 1 kHz (1000 measurings/sec.), intern 8 kHz
Measuring roller deflection	Max. 0.2 mm
Display	Graphic LCD, Backlit (user-set: on/off/auto)
3 different displays	Numeric, Numeric with graph (time-tension) X-Y-diagram
Display update rate	Approx. 2 times per second
Memory	MIN, MAX, PEAK, AVG and LAST
Damping	User-adjustable electronic damping (averaging) calculated by [X-Values OLD + Y-Values NEW] ÷ 9
Cal. Adjustment	± 10 steps in 1 % increment
Thickness compensation	Max. 2.5 mm (not available for all models)
Auto power off	Approx. 3 minutes of non-use
Temperature coefficient	Gain: less than ± 0.01 % FS* /°C
Zero point	less than ± 0.03 % FS* /°C
Temperature range	10 – 45 °C
Air humidity	85 % RH, max.
Power supply	Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter)
Housing material	Die-cast aluminium
Housing dimensions	(see Dimensions)
Weight, net (gross)	approx. 780 g / 1460 g

line
Ranges
line

Model	Range	Res	Head Width*	Yard Count	Caliration PA**
DTSE-200	1 – 200.0 cN	0.1 cN	36 mm	max. 200 tex	0.12 mm
DTSE-500	1 – 500.0 cN	0.1 cN	36 mm	max. 500 tex	0.20 mm
DTSE-1000	10 – 1000 cN	1 cN	36 mm	max. 1000 tex	0.30 mm
DTSE-2000	20 – 2000 cN	1 cN	36 mm	max. 2000 tex	0.50 mm