Heavy Duty Digital Tension Meter for Sensitive Materials

---

4 Ranges up to 20 Kg

---

For Wire & Cables up to 5 mm diameter (.200")

---

4 Tension ranges available from 150 - 2500 g up to 2 - 20 Kg

For use on cables, ropes, wires, buffer tubes, optic fiber tows etc. up to 10 mm, as well as flat material up to 10 mm width Large, hardened guide rollers for minimized material deflection with 29.5 mm groove

Kit Contents

DTSL - Heavy-Duty, Hand-Held Digital Tension Meter AC adapter with country adapters (EU, US, UK) USB cable Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Operating Instruction Carrying case

Features

• Large 30 mm diameter V-grooved rollers fabricated from Hardened Steel for materials up to max. 5 mm diameter)
• Optional U-Grooved Rollers (Code "R1"), Flat Cylindrical Rollers 6mm width between flanges (Code "B6) or 10mm width between flanges (Code "B10")
• Large diameter rollers for minimize material deflection
• 3 different display modes: 
  • numeric 
  • numeric with bargraph 
  • numeric with graph (Time-Tension)
• Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor
• 4 Seperate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name)
• User-set Min and Max alarms with indication on LCD if reading is out of limits
• User-Selectable units of measurement: cN, daN, g, kg, N, lb
• Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation
• High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks
• Setup parameters can be password protected so they are not accidentally changed by the user
• Rugged aluminium housing with rubberized handle provides a secure and comfortable grip
• Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation
• CE certified with 1-Year Warranty
• NIST-Traceable Calibration Certification in optionally available

Specifications

Calibration	According SCHMIDT factory procedure
Accuracy	For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials:  ±3 % full scale and ±1 digit
Memory for material curves	1 for SCHMIDT calibration plus 4 for customized calibrations
Measuring units	Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch
Overrange	Approx. 10 % FS*, full scale, without accuracy guarantee
Overload protection	100 % full scale
Measuring principle	Strain gauge bridge
Signal processing	Digital, 16 bit A/D converter
Measuring frequency	Max. 1 kHz (1000 measurings/sec.), intern 8 kHz
Measuring roller deflection	Max. 0.2 mm
Display	Graph LCD
3 different displays	Numeric  Numeric with graph (time-tension) X-Y-diagram
Display update rate	Approx. 2 times per second
Memory	MIN, MAX, PEAK, AVG and LAST
Damping	Adjustable electronic damping (averaging)
Cal. Adjustment	± 10 steps in 1 % increment
Thickness compensation	Max. 2.5 mm (not available for all models)
Auto power off	Approx. 3 minutes of non-use
Temperature coefficient	Gain: less than ± 0.01 % FS* /°C
Zero point	less than ± 0.03 % FS* /°C
Temperature range	10 - 45 °C
Air humidity	85 % RH, max.
Power supply	LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h AC adapter 100 - 240 V AC, adapter (EU, USA, UK)
Housing material	Die-cast aluminium
Housing dimensions	(see Dimensions)
Weight, net (gross)	approx. 940 g / 1620 g

Ranges

* Width of bracket assembly

Roller Guide

Related Products

Roller Guide Available Rollers for Hand-Held Tension Meters

Downloads

DTSL - Heavy-Duty, Hand-Held Digital Tension Meter - Dimensions