KXE Warp Tension Meter

See More Tension Meters, Digital

Warp Tension Meter

Portable measuring head to measure yarn groups of weaving and warping machines

The KXE Warp Tension Meter is designed to measure tensions during warping and weaving. The unique sensor configuration provided two 25 mm wide cylindrical roller for the capture of two groups of yarns, one on each side of the sensor for measurement. Therefore the sensor will be measuring 50 mm of ends while the process is running. The electronic indicator provides for measurement and storage of the critical high and low peaks that will be measuring in the weaving operation.These peaks can them be analyzed and used for process evaluation. Stored data can be transferred to a PC and analyzed using the FREE Tension Inspect software.

line
Kit Contents
line

KXE Warp Tension Meter
Connecting cable supplied
Rechargeable battery
Universal AC-Charger
Includes USB data transfer cable
Tension Inspect Software

line
Features
line

Portable measuring head to measure yarn groups of weaving and warping machines using 50 mm wide measuring roller
The sensor can easily be engaged or disengaged while the machine is running
Battery-powered Hand-Held Tension Indicator features backlit LCD Display with 2 times/second update rate.
Storage of last, average, Max, MIN, PEAK-MAX, PEAK-MIN tension values during an operator set measuring period
4 different memory modes can be selected by the operator:
- Mode S: only statistical values per series are displayed
- Mode L: statistics plus 10 displayed values of each series of measurement
- Mode C: statistics plus 4000 displayed values arbitrary splited up to 255 series
- Mode F: as C plus higher sampling rate of 100 Hz = values/s
LCD display with illuminated backgroud for better reading
Adjustable electronic damping for more stable readings when tensions are constantly fluctuating
Constant measuring width at the yarn group of 50 mm by catch thread system
Values on the LCD display can be flipped/reversed for right or left hand use
Memory of max. 4000 displayed tension values split up to 255 series of measurements and statistics (Last, AVG, MIN and MAX of displayed values, MIN-PEAK and MAX-PEAK are values measured within a measuring frequency of 5 kHz)
USB Output for stata transfer to PC. Supplied with TensionInspect Software and USB cable

line
Specifications
line

Accuracy	for 10 % to 90 % of range: ±1 % full scale and ±1 digit for remainder of range: ±3 % full scale and ±1 digit
Calibration	using factory calibration material and procedure
Measuring Units	daN
Overrange	10 % full scale, without accuracy guarantee
Overload Protection	200% full scale
Measuring Principle	Strain gauge bridge
Signal Processing	Digital 24 bit A/D converter
Damping	Adjustable electonic damping (Moving averaging)
Measuring Frequency	1 kHz, internal only (MIN-PEAK, MAX-PEAK)
Display	4 digit, 11 mm high backlit LCD Display
Display Update Time	Approx. 2 times per second
Memory	Max. 4000 values plus statistics
Output Signal	USB
Communications Frequency	1 to max. 100 readings/sec
Connection Cable	Sensor to display unit 1.5 meter (5 ft.)
Temperature Coefficient	Gain: less than ± 0.01 % full scale /C°
Temperature Range	10 - 45 °C
Air Humidity	85 % RH, max.
Auto Power Off	Appox. after 3 minutes of non-use
Battery	Built-in Lithium Ion Rechargeable Battery
Battery Life
Battery Recharging	approx. 3.5 hours for full charge
Battery Charger	100 - 240 V AC with plug adapters for EU, USA & UK
Housing Material	Aluminium profile with plastic outer casing (PVC)
Housing Dimensions	230 x 45 x 48 mm (LxBxH)
Weight	Approx. 370 g
Sensor	Refer to pdf download
Measuring Rollers	2 x 22 mm ball bearing rollers, total 50 mm
Width of Outer Rollers	100 mm (ball bearing rollers)
Reference Frame Height Adjustment	24 mm
Material	Anodized aluminium
Reference Frame Dimensions	108 x 138 mm
Weight	Approx. 1.8 Kg

line
Tension Ranges
line

Model	Range	Resolution
KXE-20K	0.50 - 20.00 daN	0.01 daN
KXE-50K	0.5 - 50.0 daN	0.1 daN

line
Operation
line

Swivel the lever in direction to the handle to move the reference frame with the support rollers upwards. Hold the measuring head over the yarn group, so that it runs parallel to the measuring feeler and the support rollers. Shove the measuring roller through the yarn group, turn the measuring head by 90° and swivel the lever forward