Available in 14 rated load ranges:
0 - 5N to 0 - 1000N

The dual-axis radial force sensor offers two measuring axis, vertically to each other. Force introduction occurs radially at the bearing journal. Any acting force can be splitted vectorially into X- and Y-components.

• Fields of application:
• For research and industry
• Acquisition of axle loads, bearing reactions and unbalances

XY-force measurement on shafts and axles force measurement on pivot joints and crankshafts

Recording of polar force diagrams

The high mechanical stiffness of the load cell enables measurement with virtually no excursion

The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of direct axial forces

Both force signals get conditioned with a 2-channel measuring amplifier solution. Value and direction of the acting force are acquired.

For analysis the data can be stored in the PC, e.g. with the software HCC-Easy.

Its export function enables the user to transfer the data to further software for extended analysis, e.g. generating a XY-diagram.

Example: Polar diagram of the force in a crankshaft, force components against angle of rotation

Features

• 2 measuring axis, vertically to each other.
• Independent of the force introduction point, i.e. the sensor is not affected by lever arm action.
• Thought-through concept of housing for simple mounting.
• High overload protection.
• No influence of any axial tilt torques or direct axial forces which might appear.
• Robust, stainless steel housing

Specifications

Ranges

Downloads

RFS150-XY Radial Force Sensor With 2 Measuring Axis - Data Sheet