Name: Tramex FTK Flooring Tech Kit
Brand: Tramex
SKU: 1905
Price: 980.00 USD
Availability: InStock

Tramex FTK Flooring Tech Kit

See More Flooring Moisture Inspection Kits

Tramex FTK Flooring Tech Kit

Industry: Flooring Inspection, Flooring Installation.

A compact kit for instant and precise moisture testing of concrete floors and ambient conditions. The FTK Flooring Tech Kit is the ideal non destructive test kit for monitoring the most crucial information at the time of install. The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Ambient Tramex DL-RHTX Feedback DataLogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Contact Temperature Probe provides temperature readings of the floor surface. The Flooring Tech Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

line
Kit Contents
line

line
Specifications
line

Size	13.2" x 9.5" x 3.2" (33.5cm x 24cm x 8cm)
Weight	2.8 lbs (1.3kg)
Power	3 x AA batteries

Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter:

Size	6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm)
Weight	12.1oz (344g)
Construction	ABS Body
Power	2 x AALR6 ALKALINE (included)
Display	Analogue
Depth of penetration	approx. ¾" (20 mm)
Moisture Content for Concrete	0 to 6 %
Comparative for Gypsum floor screed	0 to 10
Reference scale	0 to 100

Tramex DL-RHTX Feedback DataLogger

Size	3.94" x 3.54" x 1.38" (100mm x 90mm x35mm)
Weight	3.53oz (100g)
Construction ABS enclosure Power	1 x AA type battery 1.5 Volt
Memory	100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature)
Logging Rate	Logger interval adjustable between 5 minutes and 1 hour
Transmission Range	Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand

Tramex CTP Contact Temperature Probe

Units	ºC (ºF)
Temperature Range	-30ºC to +80ºC (-20ºF to +175ºF)
Accuracy	±0.5ºC from -10ºC to +85ºC (±0.9ºF from 14ºF to 185ºF)
Resolution	0.1% over the complete range

line
Related Products
line

Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter

Clear easy-to-read analog dial
Instant and precise readings to a depth of approximately 3/4" into the slab

line

Tramex DL-RHTX Feedback DataLogger

Bluetooth BLE enabled for use with mobile devices
Up to 100,000 data point entries. Instant set up and start modes
Precise Ambient Relative Humidity and Temperature logging

line

Tramex RHIE2 Electronic Interface Cable

Electronic Interface Cable for Tramex Hygro-i Probes
Fast Acclimation and Temperature response time
Proven robustness, Durable and Reusable

line

Tramex IRT2 Infrared Surface Thermometer

his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance.

line

Tramex Hygro-i2 Relative Humidity Probe

Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test

line

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X

For use with CMEX5, CMEX2, MRH3 & PTM.
Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
Order Code: HH14TP30B (For use with CMEX5)

line

Tramex CALCRH Calibration Check for CME5, CMEX5

The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab.

line

Tramex HA21SP52 Hammer-Action Pin-Type Electrode

Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3.
Order Code: HA21SP52 (For use with MRH3)
Order Code: HA21SP52B (For use with CMEX5)

line

Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200

Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH
Order Code: HH14SP200 For use with MRH3
Order Code: HH14SP200B For use with CMEX5

line

Tramex CALCRH Calibration Check for CME5, CMEX5

Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3
Order Code: HH14SP90 For use with MRH3
Order Code: HH14SP90 For use with CMEX5

line

Tramex ASTM F2170 Accessory Pack

Accessory Pack for RH testing
The AP-F2170-B for use with the: CMEX5 and DL-RHTX
The AP-F2170 for use with the: CMEX2 and MRH3

line

Tramex Extension Handle for ME5, CME5 and CMEX5

The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
Order Code: E5-HBS