Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install
Non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation
Compact Kit for performing the Tramex Installation Quick Check for Concrete Moisture
Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install
The Tramex IQCK Flooring Installation Quick Check Kit is a compact kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation. Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector provides surface temperature readings and ambient temperature and dew point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Kit comes in a Tramex Easy-travel case.
Kit Contents
Specifications
Kit:
| Size | 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm) |
| Weight | 2.8lbs (1.3kg) |
| Power | 2 x AA batteries, 1 x 9 volt PP3 battery |
Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter:
| Size | 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) |
| Weight | 12.1oz (344g) |
| Construction | ABS Body |
| Power | 2 x AALR6 ALKALINE (included) |
| Display | Analogue |
| Depth of penetration | approx. ¾" (20 mm) |
| Moisture Content for Concrete | 0 to 6 % |
| Comparative for Gypsum floor screed | 0 to 10 |
| Reference scale | 0 to 100 |
Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector:
| Temperature Range | -58ºF to 716ºF (50ºC to 380ºC) |
| Display resolution | 0.1 |
| Emissivity | Fixed at 0.95 |
| Temperature accuracy | -58º to 32ºF / -50º to 20ºC: +/- 32º to 716ºF / 3.5ºC 20º to 380 ºC: +/-1.5ºC |
| Wavelength range | 8 – 14um |
| Humidity Range | 0 - 100% RH |
| Humidity accuracy | +/-3.5% (20% to 80%) |
| Dew point temperature | (-22 to 212)ºF / (-30 to 100)ºC |
| D:S | 20:1 |
| Operating temp | 32 to 122ºF (0 to 50ºC) |
| Storage temp | -4 to 140ºF (-10 to 60ºC) |
| Relative humidity | 10%-90%RH operating, <80%RH storage |
Related Products
Tramex Extension Handle for ME5, CME5 and CMEX5
- The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
- Order Code: E5-HBS
Downloads
