Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install

---

Non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation

---

Compact Kit for performing the Tramex Installation Quick Check for Concrete Moisture
Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install

The Tramex IQCPK Flooring Installation Quick Check Plus Kit is a compact kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation. Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The CMEX5 has a built-in hygrometer providing ambient relative humidity, temperature and dew-point measurements. The Infrared Thermometer provides surface temperature readings for comparison with the dew-point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Plus Kit comes in a Tramex Easy-travel case.

Kit Contents

Tramex CMEX5 Concrete Moisture Encounter X5 Tramex IRT2 Infrared Surface Thermometer Free App available for Android and iOS (phone not included) Carring Case

Specifications

Kit:

Size	13.8” x 9.1” x 3.5” (35cm x 23cm x 90cm)
Weight	2.8lbs (1.3kg)
Power	2 x AA batteries, 1 x 9 volt PP3 battery

Tramex CMEX5 Concrete Moisture Encounter X5

Moisture content for Concrete	0 → 6.9 %
Comparative for Gypsum floor screed	0 → 12
CM Equiv Anhydrite/Concrete	0→2.7 / 0→ 4.3
Reference scale	0 → 100
Relative Humidity	0 → 99% (with optional Hygro-i2 ® probe)
Humidity accuracy	0% → 99%RH +/- 2% @ 25°C / 77°F
Moisture content for wood	5→ 30 % (with optional wood pin probes)
Construction	ABS Body
Power	2 x AALR6 ALKALINE (included)
Display	Digital
Depth of penetration in concrete	approx. ¾" (20mm)

Tramex IRT2 Infrared Surface Thermometer

Temperature Measurement Range	-58° to 1202°F ( -50° to 650°C )
Temperature Measurement Accuracy	+/- 4°F/C or +/- 2% of reading >32°F (0°C) | +/- 3°F/C or +/- 3% of reading <32°F (0°C)
Sensitivity	1°F (0.5°C)
Distance -to-Spot Ratio	12:1
Emissivity	Adjustable from 0.10 to 1.0
Operating Temperature	32° to 122°F (0°to 50°C) @ 10 to 90%RH

Related Products

Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Display Digital

Tramex IRT2 Infrared Surface Thermometer His hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5)

Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS

Tramex Calibration Check Plate Calibration Check Plate Tramex CME5, CMEX5, CME4 and CMEX2 Order Code: CALCRH

Downloads

Tramex IQCPK Flooring Installation Quick Check Plus Kit - Data Sheet

Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet

Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual

Tramex Meters App - Visualizing, Photographing and Geo-tagging

Accessories for Tramex Moisture Meters - Online Catalog