Dakota Ultrasonics R9 (PR-9) Sonic Tester Thickness Gauge Z-309-0001 / Z-309-0002 is a dedicated design for the racing industry

---

Factory calibration traceable to NIST & MIL-STD-45662A.

---

Range: Measures from 0.025 to 36.00 inches (0.63 to 914.4 millimeters). Range dependent on material and transducer type.

---

The Dakota Ultrasonics R9 (PR-9) Sonic Tester Thickness Gauge Z-309-0001 / Z-309-0002 is a dedicated design for the racing industry, and commonly used to measure the thickness of cylinder walls, head ports, decks, chassis tubing, body panels, and windshields. An additional benefit is the dual element style of probe with the ability to locate blind surface corrosion or deterioration on the blind surface in the water jacket area prior to boring a cylinder or port.The high speed scan feature takes 100 measurements per second to save time when scanning a complete cylinder.Simply drag the probe from the bottom of the cylinder, at a given clock position in the cylinder, up to the deck area to locate the minimum thickness found.Scan can then be switched off and the user can find the exact location of the minimum thickness.

The PR-9 has three material calibration options (single point, two point, and target velocity) for increased accuracy.Cylinder wall mapping software available for manually creating reports.Finally, our 5 year limited warranty indicates how we feel about the quality.

Kit Contents

Dakota Ultrasonics PR-9 Ultrasonic Thickness Gauge Probe, 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate Operating Instruction Manual Foam-fitted carrying case

Features

• Includes NIST Calibration Certificate
• Special-purpose probes are offered for a variety of applications
• High Speed Scan Mode displays the lowest measurement found during a scan
• Resolution of 0.001 inch (0.01 mm)
• 5 Year Warranty*
• CE Certified

Specifications

Range	Measures from 0.025 to 36.00 inches (0.63 to 914.4 millimeters). Range dependent on material and transducer type.
Resolution	.001 inches / 0.01mm
Velocity Range	0.0120 to .7300 in/μs / 305 to 18,542 m/sec
Units	English & Metric (inch or mm)
Transducer Types	Dual Element (1 to 10 MHz)
Power Source	Two 1.5V alkaline, 1.2V NiCad, or 1.5V Lithium AA cells.
Battery Life	Typically operates for 45 hours on alkaline and 23 hours on NiCad. Low battery indicator on display. Auto shut-off after 5 minutes of inactivity.
Display	Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 in digit height
Keyboard	Sealed membrane that is resistant to both water and petroleum products.
Case	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature	-22 to 167F (-30 to 75C)
Weigth, net	11 ounces
Dimensions	2.5 W x 5.17 H x 1.24 D inches / 63.5 x 131.3 x 31.5 mm
Warranty	5 year limited (90 days on probes)
Certification	CE Approved, Factory calibration traceable to national standards

Downloads

Dakota Ultrasonics PR 9 Ultrasonic Thickness Gauge Sonic Tester Racing with T 104 2120 Probe For Cylinders Walls Decks Sonic Testers Transducers- Accessories

Dakota Ultrasonics PR 9 Ultrasonic Thickness Gauge Sonic Tester Racing with T 104 2120 Probe For Cylinders Walls Decks - Data Sheet

Dakota Ultrasonics Engine Builders Racing Sonic Testers Transducers Accessories - List