Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output
Resolution: .0001" (0.001 mm)
Calibrate to known thickness or Select Material from 8 Presets
5-Year Warranty, Made in USA
Datalogging: Built-in datalogging for 10,000 data values, USB Output
Range with Standard Delay Line Transducer
0.0060" - 1.000" / 0.150 - 25.40 mm
Range with Contact Transducers
up to 36.00" / 915.0 mm
The Checkline TI-007DLX is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The TI-007DLX does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software.
The TI-007DLX has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).
Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode
The TI-007DLX can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm).
Kit Contents
- TI-007DLX Precision Ultrasonic Wall Thickness Gauge
- Probe
- 4 oz. bottle of coupling fluid
- USB-C Data transfer cable
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Carrying case
- Instruction Manual
| |
Features
- Includes NIST Traceable Calibration Certificate
- Large, backlit LCD display retains last reading
- Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm
- Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output
- Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
- Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
- Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)
- LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
- Operates on two (2) AA Batteries - 45 hours continuous operation
- Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
- Powered by: 120MHz FPGA timing & 100 volt spike pulser
- Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
- Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode
- Optional serial RS-232 or Bluetooth output
- IP 65 Rated for protection even in the toughest field conditions
- 5 Year Warranty, CE-Certified and Made in USA
Specifications
| Range with Standard Probe | 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel |
| Resolution | 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution |
| Display | Multi-function 7 segment 4.5 digit liquid crystal display with Back-light |
| Velocity Range | 0.0120 to .7300 in/μs (305 to 18,542 m/sec) |
| Display Backlight | Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options |
| Output Optional | RS-232 and Bluetooth |
| Cable | 4 ft. (1.2 m) with Microdot/Lemo00 connector. |
| Output | USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output |
| Operating Temperature | -22 to 167F (-30 to 75C) |
| Housing Protection | IP65 |
| Battery Life | Typically operates for 35 hours on alkaline and 18 hours on NiCad |
| Weight | 11 ounces (308 grams) |
| Dimensions | 2.5 x 5.17 x 1.25"
(64 x 131 x 32 mm) |
| Warranty | Gauge: 5 Years
Probes: 90 Days |
Total Measuring Range
(Steel) | 0.006 - 36.000 inches
0.15 - 924 mm
(depends on material and transducer/probe type) |
| Measuring Modes | Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) |
| Gain | Automatic time dependent gain (TDG) with manual override |
| Probe (Standard) | 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) |
| Probes (optional) | Various Single Element Delay Line and Contact Transducers (5 to 20MHz) |
| Display Update Rate | 10 Hz (10 updates/sec) |
| Battery Type | 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) |
| Housing | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Certifications | NIST Traceable and MIL-STD-45662A |
| Keypad | Sealed membrane that is resistant to both water and petroleum products
Seven or eight tactile-feedback keys |
| Pulse Repetition Frequency (PRF) | 200 Hz (200 pulses/sec) |
| To Lock Settings | With gauge powered off, press and hold the "+" key while powering on the gauge
The LOCK icon will be illuminated on the Display |
| To unLock Settings | With gauge powered off, press and hold the "-" key while powering on the gauge
The LOCK icon will turn off |
Delay Line Tips for TI-007DLX
| P/N | Description | Standard / Optional | Image |
| X-231-0000 | 1/4" x 3/8" for all metals (Short) | Standard | |
| X-241-0000 | 1/4" x 1/2" for all metals (Long) | Standard | |
| X-633-0000 | 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) | OPTIONAL | |
Related Products
Downloads
F.A.Q.
Do Checkline Ultrasonic Thickness Gauges require any training for use?
No. Checkline Ultrasonic Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.
Are Checkline Ultrasonic Thickness Gauges calibrated at the factory?
Yes. Checkline Ultrasonic Thickness Gauges arrive fully calibrated and ready to measure.
Do Checkline Ultrasonic Thickness Gauges include Certificate of Calibration?
Yes. Checkline Ultrasonic Thickness Gauges Include NIST-Traceable Calibration Certificate, CE-Certified
Can I measure the thickness of non-metallic materials like plastic and rubber with Ultrasonic Thickness Gauges?
Yes. Checkline Ultrasonic Thickness Gauges features several preprogrammed sound velocities for common materials.
Can Checkline Ultrasonic Thickness Gauges measure cast/ductile iron or cast aluminum?
Yes. Checkline Ultrasonic Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
