Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge

---

Precision Ultrasonic Wall Thickness Gauge for Thin Walls

---

Resolution: .0001" (0.001 mm)

---

Includes NIST-Traceable Calibration Certificate, CE-Certified

---

5-Year Warranty, Made in USA

---

Datalogging: NO

---

Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm

Range with Contact Transducers up to 36.00" / 915.0 mm

The Checkline TI-007X is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

The TI-007X has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).

Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode

The TI-007X can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the TI-007X does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required.

Kit Contents

Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual

Features

• Includes NIST Traceable Calibration Certificate
• Resolution of 0.0001 inch (0.001 mm)
• Large, backlit LCD display retains last reading
• Selectable units of inch or mm
• Selectable Backlight ON/OFF/AUTO
• Optional serial RS-232 or Bluetooth output
• IP 65 Rated for protection even in the toughest field conditions
• Operates on two (2) AA Batteries - 45 hours continuous operation
• Powered by: 120MHz FPGA timing & 100 volt spike pulser
• Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
• Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode
• LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
• Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
• Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
• USB Data output of single values for transfer to data collection devices (no internal memory)
• Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
• Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)
• CE-Certified
• Warranty: Gauge: 5 Years Probes: 90 Days
• Made in the USA

Specifications

Total Measuring Range | (Steel)	0.006 - 36.000 inches | 0.15 - 924 mm | (depends on material and transducer/probe type)
Range with Standard Probe	0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel
Resolution	0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution
Measuring Modes	Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX)
Gain	Automatic time dependent gain (TDG) with manual override
Velocity Range	0.0120 to .7300 in/μs (305 to 18,542 m/sec)
Probe (Standard)	1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507)
Probes (optional)	Various Single Element Delay Line and Contact Transducers (5 to 20MHz)
Cable	4 ft. (1.2 m) with Microdot/Lemo00 connector.
Display	Multi-function 7 segment 4.5 digit liquid crystal display with Back-light
Display Backlight	Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
Display Update Rate	10 Hz (10 updates/sec)
Output	USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output
Output Optional	RS-232 and Bluetooth
Operating Temperature	-22 to 167F (-30 to 75C)
Battery Type	2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Battery Life	Typically operates for 35 hours on alkaline and 18 hours on NiCad
Weight	11 ounces (308 grams)
Dimensions	2.5 x 5.17 x 1.25" | (64 x 131 x 32 mm)
Housing	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing Protection	IP65
Certifications	NIST Traceable and MIL-STD-45662A
Keypad	Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys
Pulse Repetition Frequency (PRF)	200 Hz (200 pulses/sec)
To Lock Settings	With gauge powered off, press and hold the "+" key while powering on the gauge | The LOCK icon will be illuminated on the Display
To unLock Settings	With gauge powered off, press and hold the "-" key while powering on the gauge | The LOCK icon will turn off
Warranty	Gauge: 5 Years | Probes: 90 Days

Delay Line Tips for TI-007X

P/N	Description	Standard / Optional	Image
X-231-0000	1/4" x 3/8" for all metals (Short)	Standard
X-241-0000	1/4" x 1/2" for all metals (Long)	Standard
X-633-0000	1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short)	OPTIONAL

Related Products

TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

V-Block Ultrasonic Transducer Holder

TI-PVX Precision Ultrasonic A-scan Thickness Gauge Hardware AGC gain control for multiple echo and thru-paint measurement 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs

Downloads

Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Data Sheet

Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Instruction Manual

Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Add Couplant Notice