Checkline TI-25DL Data Logging Ultrasonic Thickness Gauge

See More Ultrasonic Thickness Gauges

General purpose gauge measures a variety of materials with datalogging

Range: 0.025 - 6.00 inches - 0.60 - 150.00 mm

Resolution: 0.001" (0.01 mm)

Datalogging: YES

Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm

The TI-25DL Data Logging Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

TI-25DL Data Logging Ultrasonic Thickness Gages incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the and the Differential mode. The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value

line
Features
line

Resolution of 0.001" (0.01 mm)
Selectable units of inch or mm
Large, backlit LCD display retains last reading
RS-232C Serial output for downloading stored data to a printer or computer
Memory for 1000 data points in up to 10 batches
Special-purpose probes are offered for a variety of applications
Windows compatible data transfer program supplied at no additional cost
Includes NIST Calibration Certificate
CE Certified
Includes NIST Calibration Certificate

line Typical Applications line

typical

line Measuring Limits line

	Minimum Radius for Convex Surfaces	0.350" (8.89 mm)
	Minimum Radius for Concave Surfaces	3" (76.2 mm)
	Minimum Headroom	1" (25.0 mm)
	Minimum Sample Diameter	0.150" (3.8 mm)
	Minimum Substrate Thickness - F	na
	Minimum Substrate Thickness - NFe	na

line Specifications line

Range in Steel	0.025-6.00" (0.60-150.0 mm)
Resolution	.001" (0.01 mm)
Velocity Range	6,500-33,000 ft./sec (2000-10,000 m/sec.)
Display	4½ - Digit, 0.5" Backlit LCD
Probe	7.5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Serial Output	RS-232C (8, N, 1, user-set baud rate)
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: --ll0 to 200° F (-20 to 100° C Special high temperature probes are optionally available.
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

line Special Purpose Models line

Model	Description
TI-25DL-H	High Temperature for surfaces up to 650° F or 343° C
TI-25DL-107	Cast Iron / Plastics
TI-25DL-HW	Heavy Wall (0.040-19.999")

line Complete Kit line

The TI-25DL Data Logging Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

line Optional Accessories line

NIST-Traceable Steel Test Block
3 Sizes Available

Precision Machined and Finished
Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges

For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauges

Constructed from heavy duty Cordura Nylon
Built-in belt loop

line

CF12
Coupling Fluid

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

line

V-Block
Transducer Holder

The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

line

TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly

50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

line

P-25DL
Portable Printer for TI-25DL

Small, portable and easy to use
Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge

line Downloads line

Checkline TI-25DL Data Logging UltrasonicThickness Gauge - Certificate

Checkline TI-25DL Data Logging UltrasonicThickness Gauge - Software

TI-25DL Data Logging UltrasonicThickness Gauge - Data Sheet

TI-25DL Data Logging UltrasonicThickness Gauge - Instruction Manual

line line

F.A.Q.

Do Checkline Ultrasonic Thickness Gauges require any training for use?

No. Checkline Ultrasonic Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

Are Checkline Ultrasonic Thickness Gauges calibrated at the factory?

Yes. Checkline Ultrasonic Thickness Gauges arrive fully calibrated and ready to measure.

Do Checkline Ultrasonic Thickness Gauges include Certificate of Calibration?

Yes. Checkline Ultrasonic Thickness Gauges Include NIST-Traceable Calibration Certificate, CE-Certified

Can I measure the thickness of non-metallic materials like plastic and rubber with Ultrasonic Thickness Gauges?

Yes. Checkline Ultrasonic Thickness Gauges features several preprogrammed sound velocities for common materials.

Can Checkline Ultrasonic Thickness Gauges measure cast/ductile iron or cast aluminum?

Yes. Checkline Ultrasonic Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.

Checkline TI-25DL Data Logging Ultrasonic Thickness Gauge

Checkline TI-25DL Data Logging Ultrasonic Thickness Gauge

Similar Products