Checkline TI-25P Programmable Ultrasonic Thickness Gauge

See More Ultrasonic Thickness Gauges

Programmable Ultrasonic Wall Thickness Gauge

Range: 0.040-6.000" - 1.00-150.0 mm - With supplied probe - Other probes available

Resolution: .001" (0.01 mm)

Datalogging: NO

Measuring Range in Steel
0.040 - 6.000 inches
1.00 - 150.0 mm

The TI-25P Programmable Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion from only one side!

TI-25P Programmable Ultrasonic Wall Thickness Gages holds a single ultrasonic velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work.

Standard configuration: In its standard configuration, theTI-25P Programmable Ultrasonic Wall Thickness Gauge is factory set to measure steel.

Optional configuration: When required the TI-25P Programmable Ultrasonic Wall Thickness Gauge can be programmed to measure any other single material instead of steel. In order to program the gauge for use on any other material then factory steel, a sample of the material to be measured is required or the exact sound velocity of the material must be known.

line
Features
line

Resolution of 0.001 inch (0.01 mm)
The TI-25P Programmable Ultrasonic Wall Thickness Gauge probe is waterproof and can be submerged in water
Special-purpose probes are offered for a variety of applications
Switch-selected units for inches or mm
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
For underwater surveying, probe cable lengths up to 15 meter are optionally
Large, backlit LCD display retains last reading
Comes complete with cable and software to transfer the velocity to the gauge

line Typical Applications line

typical

line Measuring Limits line

	Minimum Radius for Convex Surfaces	0.350" (8.89 mm)
	Minimum Radius for Concave Surfaces	3" (76.2 mm)
	Minimum Headroom	1" (25.0 mm)
	Minimum Sample Diameter	0.150" (3.8 mm)
	Minimum Substrate Thickness - F	na
	Minimum Substrate Thickness - NFe	na

line Specifications line

Range in Steel	0.040-6.000" (1.00-150.0 mm) with supplied probe. Other probes available.
Resolution	0.01 millimeter (0.001 inch)
Display	4½ - Digit, 0.5" Backlit LCD
Velocity Range	1250 to 10,000 meters/sec (.0492 to .3937 in/µs)
Probe	1/4", 5 MHz, actual wearface is 5/8" (17mm)
Probe Wearface	PEEK (Polyethylethylkytone)
Cable	1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
Temp. Limits	Ambient: -30 to 50° C (-20 to 120° F) Material: -20 to 100° C (0 to 200° F) Special high temperature probes are optionally available
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	280 g (710 ounces)
Dimensions	64 x 114 x 32mm (2.5 x 4.5 x 1.25")
Accessories	Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Software	Comes complete with cable and software to transfer the velocity to the gauge.
Warranty	Gauge: 5 Years Probes: 90 Days

line Complete Kit line

The TI-25P Programmable Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

For setting the ultrasonic velocity, a connection cable and software are supplied

line Related Products line

NIST-Traceable Steel Test Block
3 Sizes Available

Precision Machined and Finished
Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges

For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauges

Constructed from heavy duty Cordura Nylon
Built-in belt loop

line

CF12
Coupling Fluid

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

line

TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly

50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

line

V-Block
Transducer Holder

The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.

line Downloads line

Checkline TI-25P Programmable Ultrasonic Thickness Gauge - Certificate

Checkline TI-25P Programmable Ultrasonic Thickness Gauge - Instruction Manual

line line

F.A.Q.

Do Checkline Ultrasonic Thickness Gauges require any training for use?

No. Checkline Ultrasonic Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

Are Checkline Ultrasonic Thickness Gauges calibrated at the factory?

Yes. Checkline Ultrasonic Thickness Gauges arrive fully calibrated and ready to measure.

Do Checkline Ultrasonic Thickness Gauges include Certificate of Calibration?

Yes. Checkline Ultrasonic Thickness Gauges Include NIST-Traceable Calibration Certificate, CE-Certified

Can I measure the thickness of non-metallic materials like plastic and rubber with Ultrasonic Thickness Gauges?

Yes. Checkline Ultrasonic Thickness Gauges features several preprogrammed sound velocities for common materials.

Can Checkline Ultrasonic Thickness Gauges measure cast/ductile iron or cast aluminum?

Yes. Checkline Ultrasonic Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.

Checkline TI-25P Programmable Ultrasonic Thickness Gauge

Checkline TI-25P Programmable Ultrasonic Thickness Gauge

Similar Products