Dakota Ultrasonics PVX High Precision Thin Wall Thickness gauge ideal for applications with minimum access or contact areas. Enhanced graphic scope Displays A Scan & B Scan for a cross section view

---

Resolution: 0.0001" (0.001 mm)

---

Datalogging: YES

---

The Dakota Ultrasonics PVX Precision Ultrasonic Wall thickness gauge provides the flexibility necessary for both high resolution and penetration requirements.

It's ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications) makes it the perfect flexibel tool for very precise and delicate measurements. The adjustable resolution settings add to the PVX’s flexibilty.

The selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +/- Rectified waveform, and Large Digits with Scan Bar.

The time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.

Kit Contents

Dakota Ultrasonics PVX Precision Ultrasonic A-Scan Thickness Gauge 10MHz Pencil Probe 4 oz. bottle of coupling fluid NIST Traceable Calibration Certificate

Data Transfer Software Serial Output 2 AA batteries Carrying case Instruction Manual

Features

• Hardware AGC gain control for multiple echo and thru-paint measurement.
• 2 year limited warranty
• Multiple calibration options: One Point, Two Point, or selection from a Material List.
• PVX comes complete with our Windows® PC software for transferring data to and from a PC.
• 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
• User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units
• PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.
• Visual and audible alarm with hi and lo limit settings for specific application tolerances.
• The high speed scan feature
• 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe
  Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view.
• Includes NIST-Traceableb calibration certificate
• CE Certified

Specifications

Range in Steel	Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm). Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm). Pulse-Echo Contact Mode: Steel .040in - 10.0in (1mm - 254mm). Plastics from .01
Resolution	(selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm).
Velocity Range	.0492 to .3936 in./ms  1250 to 9999 meters/sec
Units	English & Metric
Memory	16 megabit non-volatile ram.
Data Logger	12,000 readings and waveforms (alpha numeric storage).
Display	1/8 in. VGA grayscale display
Setups	16 factory and 48 user-defined setups.
Display Views	A-Scan Rectified +/- (half wave view) RF (full waveform view) B-Scan Time based cross section view. Display speed of 15 secs per screen. Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
Power Source	Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life	Typically operates for 150 hours on alkaline and 100 hours on NiCad
Power off	Auto power off if idle 5 min.
Operating Temperature	-14° to 140°F (-10° to 60°C).
Size	2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
Weight	0.4 kg (0.9 lbs )
Warranty	Gauge: 2 Years Probe: 90 Days

PVX - Delay Line

P/N	Description	Standard / Optional	Image
X-152-0000	1/16” Dia. x .450" L	Standard
X-752-0000	1/8" Dia. x .450" L	Optional

TI-PVX-5507 - Delay Line

P/N	Description	Standard / Optional	Image
X-231-0000	1/4" x 3/8" for all metals (Short)	Standard
X-241-0000	1/4" x 1/2" for all metals (Long)	Standard
X-633-0000	1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short)	Standard on "-GT" models
X-532-0000	3/16" x 3/8" Conical Tip for all metals (Cone)	Optional
X-132-0000	1/8" x 3/8" Conical Tip for all metals (Cone)	Optional
X-533-0000	3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone)	Optional

Related Products

TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop